SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Maxtor
A 300GB, 7200 RPM SATA 1.5Gb/s desktop drive with 16MB cache and native command queuing
This Maxtor DiamondMax 10 drive delivers 300GB of storage on a SATA 1.5Gb/s interface. It spins at 7200 RPM with a 16MB cache and 9ms average seek time. The 3.5-inch form factor fits standard desktop bays. It suits builders restoring or expanding older systems that require a native SATA 1.5Gb/s connection.
A fluid dynamic bearing motor reduces acoustic output during normal operation. The drive includes a Shock Protection System and a Data Protection System to guard against physical impacts and data errors. Native command queuing helps optimise the order of read and write requests. The unit is RoHS compliant.
This drive serves as a direct replacement for a failed 3.5-inch SATA 1.5Gb/s hard drive in a desktop PC. It upgrades capacity over smaller drives of the same interface and era. The jump is worthwhile when the host system only supports SATA 1.5Gb/s and a bare drive without cables is preferred.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 10 |
| Model | 6L300S0 |
| Packaging | Bare Drive |
| Interface | SATA 1.5Gb/s |
| Capacity | 300GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Native command queuing Fluid dynamic bearing motor for quiet operation RoHS compliant Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| Teža pošiljke | 0.68 kg |
| Velikost pošiljke | 203 × 152 × 51 mm |
Mount the drive in a 3.5" bay using four screws, connect the SATA data cable to a SATA port on the motherboard and attach a SATA power connector from the PSU; the step often missed is enabling the SATA port in BIOS so the OS can detect the 300GB volume.
No routine maintenance is required for the sealed mechanism; listen for new clicking or grinding noises from the fluid dynamic bearing motor and run SMART checks periodically — if reallocated sectors rise or seek errors appear, replace the drive.
The SATA 1.5Gb/s interface caps maximum sustained transfer rate, so sequential reads and writes will hit that ceiling before the platters or cache become the bottleneck.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?