Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 3.5 inch bare hard drive with exposed circuit board

Maxtor

Maxtor DiamondMax 10 6L300S0 300GB 7200 RPM 16MB Cache SATA 1.5Gb/s 3.5" internal hard drive

SKU CH-ZGQZ-D2X6X MPN 6L300S0

A 300GB, 7200 RPM SATA 1.5Gb/s desktop drive with 16MB cache and native command queuing

  • PackagingBare Drive
  • InterfaceSATA 1.5Gb/s
  • Capacity300GB
  • RPM7200 RPM
  • Cache16MB
  • Average Seek Time9ms
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 16 MB cache buffers bursts for smoother multitasking
  • SATA 1.5 Gb/s interface fits legacy motherboards directly
  • Fluid dynamic bearing motor cuts acoustic noise
  • Shock and Data Protection Systems guard stored files

Ideal for legacy desktop builds

This Maxtor DiamondMax 10 drive delivers 300GB of storage on a SATA 1.5Gb/s interface. It spins at 7200 RPM with a 16MB cache and 9ms average seek time. The 3.5-inch form factor fits standard desktop bays. It suits builders restoring or expanding older systems that require a native SATA 1.5Gb/s connection.

Quiet motor and protective systems

A fluid dynamic bearing motor reduces acoustic output during normal operation. The drive includes a Shock Protection System and a Data Protection System to guard against physical impacts and data errors. Native command queuing helps optimise the order of read and write requests. The unit is RoHS compliant.

Replaces failed or smaller SATA drives

This drive serves as a direct replacement for a failed 3.5-inch SATA 1.5Gb/s hard drive in a desktop PC. It upgrades capacity over smaller drives of the same interface and era. The jump is worthwhile when the host system only supports SATA 1.5Gb/s and a bare drive without cables is preferred.

Helstu kostir

  • 7200 RPM spindle speed delivers responsive desktop performance
  • 16 MB cache buffers bursts for smoother multitasking
  • SATA 1.5 Gb/s interface fits legacy motherboards directly
  • Fluid dynamic bearing motor cuts acoustic noise
  • Shock and Data Protection Systems guard stored files

Tæknilýsing

BrandMaxtor
SeriesDiamondMax 10
Model6L300S0
PackagingBare Drive
InterfaceSATA 1.5Gb/s
Capacity300GB
RPM7200 RPM
Cache16MB
Average Seek Time9ms
Average Latency4.17ms
FeaturesNative command queuing
Fluid dynamic bearing motor for quiet operation
RoHS compliant
Improved reliability with:
Shock Protection System
Data Protection System
Form Factor3.5"
Sendingarþyngd0.68 kg
Stærð sendingar203 × 152 × 51 mm

Spurningar um þessa vöru

How do I install the 3.5" SATA 1.5Gb/s drive and which step is often missed?

Mount the drive in a 3.5" bay using four screws, connect the SATA data cable to a SATA port on the motherboard and attach a SATA power connector from the PSU; the step often missed is enabling the SATA port in BIOS so the OS can detect the 300GB volume.

What maintenance or replacement will the Maxtor DiamondMax 10 6L300S0 need later?

No routine maintenance is required for the sealed mechanism; listen for new clicking or grinding noises from the fluid dynamic bearing motor and run SMART checks periodically — if reallocated sectors rise or seek errors appear, replace the drive.

What limit appears first during sustained transfers on this 7200 RPM 16MB cache drive?

The SATA 1.5Gb/s interface caps maximum sustained transfer rate, so sequential reads and writes will hit that ceiling before the platters or cache become the bottleneck.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.