SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Maxtor
A 300GB, 7200 RPM SATA 1.5Gb/s desktop drive with 16MB cache and native command queuing
This Maxtor DiamondMax 10 drive delivers 300GB of storage on a SATA 1.5Gb/s interface. It spins at 7200 RPM with a 16MB cache and 9ms average seek time. The 3.5-inch form factor fits standard desktop bays. It suits builders restoring or expanding older systems that require a native SATA 1.5Gb/s connection.
A fluid dynamic bearing motor reduces acoustic output during normal operation. The drive includes a Shock Protection System and a Data Protection System to guard against physical impacts and data errors. Native command queuing helps optimise the order of read and write requests. The unit is RoHS compliant.
This drive serves as a direct replacement for a failed 3.5-inch SATA 1.5Gb/s hard drive in a desktop PC. It upgrades capacity over smaller drives of the same interface and era. The jump is worthwhile when the host system only supports SATA 1.5Gb/s and a bare drive without cables is preferred.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 10 |
| Model | 6L300S0 |
| Packaging | Bare Drive |
| Interface | SATA 1.5Gb/s |
| Capacity | 300GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Native command queuing Fluid dynamic bearing motor for quiet operation RoHS compliant Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| Težina pošiljke | 0.68 kg |
| Dimenzije pakiranja | 203 × 152 × 51 mm |
Mount the drive in a 3.5" bay using four screws, connect the SATA data cable to a SATA port on the motherboard and attach a SATA power connector from the PSU; the step often missed is enabling the SATA port in BIOS so the OS can detect the 300GB volume.
No routine maintenance is required for the sealed mechanism; listen for new clicking or grinding noises from the fluid dynamic bearing motor and run SMART checks periodically — if reallocated sectors rise or seek errors appear, replace the drive.
The SATA 1.5Gb/s interface caps maximum sustained transfer rate, so sequential reads and writes will hit that ceiling before the platters or cache become the bottleneck.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?