SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Maxtor
A 300GB, 7200 RPM SATA 1.5Gb/s desktop drive with 16MB cache and native command queuing
This Maxtor DiamondMax 10 drive delivers 300GB of storage on a SATA 1.5Gb/s interface. It spins at 7200 RPM with a 16MB cache and 9ms average seek time. The 3.5-inch form factor fits standard desktop bays. It suits builders restoring or expanding older systems that require a native SATA 1.5Gb/s connection.
A fluid dynamic bearing motor reduces acoustic output during normal operation. The drive includes a Shock Protection System and a Data Protection System to guard against physical impacts and data errors. Native command queuing helps optimise the order of read and write requests. The unit is RoHS compliant.
This drive serves as a direct replacement for a failed 3.5-inch SATA 1.5Gb/s hard drive in a desktop PC. It upgrades capacity over smaller drives of the same interface and era. The jump is worthwhile when the host system only supports SATA 1.5Gb/s and a bare drive without cables is preferred.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 10 |
| Model | 6L300S0 |
| Packaging | Bare Drive |
| Interface | SATA 1.5Gb/s |
| Capacity | 300GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Native command queuing Fluid dynamic bearing motor for quiet operation RoHS compliant Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| Prepravná hmotnosť | 0.68 kg |
| Rozmery balenia | 203 × 152 × 51 mm |
Mount the drive in a 3.5" bay using four screws, connect the SATA data cable to a SATA port on the motherboard and attach a SATA power connector from the PSU; the step often missed is enabling the SATA port in BIOS so the OS can detect the 300GB volume.
No routine maintenance is required for the sealed mechanism; listen for new clicking or grinding noises from the fluid dynamic bearing motor and run SMART checks periodically — if reallocated sectors rise or seek errors appear, replace the drive.
The SATA 1.5Gb/s interface caps maximum sustained transfer rate, so sequential reads and writes will hit that ceiling before the platters or cache become the bottleneck.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?