Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular metal power supply unit with built-in fan and AC voltage selector switch

Mean Well

Mean Well PB-360N-12 14.7V 24.3A Battery Charger Power Supply

SKU CH-04JZ-PJ9DE

Charges lead-acid batteries at 14.7V 24.3A with three-stage charging, selectable 115/230VAC input and passive PFC

  • TypeAT
  • Three-stage charging optimises lead-acid battery life
  • Selectable 115/230 VAC input suits global mains supplies
  • Built-in passive PFC meets EN61000-3-2 Class A
  • Comprehensive protection covers short circuit, reverse polarity, over-voltage and over-temperature
  • Fan runs only when charging current demands cooling

Lead-acid battery charger

The Mean Well PB-360N-12 is a single-output power supply designed to charge lead-acid batteries using a three-stage charging profile. It delivers 14.7V at up to 24.3A for use in backup power, industrial equipment or off-grid installations. The unit operates from AC mains selected by a 115/230VAC switch.

Input voltage selection and PFC

The charger accepts either 115VAC or 230VAC input set by a manual switch, so the installer must match the local mains voltage before connection. An optional built-in passive PFC function complies with EN61000-3-2 Class A for harmonic current limits. No active power factor correction is included.

Protection features and cooling

Built-in protections cover short circuit, reverse polarity, over voltage and over temperature conditions. A two-colour LED indicator shows the charging status at a glance. The fan runs only when charging current demands it, reducing noise during low-load periods. The AT form factor suits standard industrial mounting.

Priekšrocības

  • Three-stage charging optimises lead-acid battery life
  • Selectable 115/230 VAC input suits global mains supplies
  • Built-in passive PFC meets EN61000-3-2 Class A
  • Comprehensive protection covers short circuit, reverse polarity, over-voltage and over-temperature
  • Fan runs only when charging current demands cooling

Specifikācijas

TypeAT

Jautājumi par šo preci

Which output voltage should I pick for a 12 V lead-acid bank?

The unit delivers 14.7 V, which is the correct absorption voltage for a nominal 12 V lead-acid battery.

What does the 360 W rating mean when the charger is connected to a battery?

At 14.7 V the supply can provide up to 24.3 A, giving roughly 360 W of charging power.

How does the AC input selector affect the PFC compliance?

The passive PFC meets EN61000-3-2 Class A whether the switch is set to 115 VAC or 230 VAC.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.