Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Mean Well

Mean Well PB-360N-12 14.7V 24.3A Battery Charger Power Supply

SKU CH-04JZ-PJ9DE

Charges lead-acid batteries at 14.7V 24.3A with three-stage charging, selectable 115/230VAC input and passive PFC

  • TypeAT
  • Three-stage charging optimises lead-acid battery life
  • Selectable 115/230 VAC input suits global mains supplies
  • Built-in passive PFC meets EN61000-3-2 Class A
  • Comprehensive protection covers short circuit, reverse polarity, over-voltage and over-temperature
  • Fan runs only when charging current demands cooling

Lead-acid battery charger

The Mean Well PB-360N-12 is a single-output power supply designed to charge lead-acid batteries using a three-stage charging profile. It delivers 14.7V at up to 24.3A for use in backup power, industrial equipment or off-grid installations. The unit operates from AC mains selected by a 115/230VAC switch.

Input voltage selection and PFC

The charger accepts either 115VAC or 230VAC input set by a manual switch, so the installer must match the local mains voltage before connection. An optional built-in passive PFC function complies with EN61000-3-2 Class A for harmonic current limits. No active power factor correction is included.

Protection features and cooling

Built-in protections cover short circuit, reverse polarity, over voltage and over temperature conditions. A two-colour LED indicator shows the charging status at a glance. The fan runs only when charging current demands it, reducing noise during low-load periods. The AT form factor suits standard industrial mounting.

Kohokohdat

  • Three-stage charging optimises lead-acid battery life
  • Selectable 115/230 VAC input suits global mains supplies
  • Built-in passive PFC meets EN61000-3-2 Class A
  • Comprehensive protection covers short circuit, reverse polarity, over-voltage and over-temperature
  • Fan runs only when charging current demands cooling

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

Which output voltage should I pick for a 12 V lead-acid bank?

The unit delivers 14.7 V, which is the correct absorption voltage for a nominal 12 V lead-acid battery.

What does the 360 W rating mean when the charger is connected to a battery?

At 14.7 V the supply can provide up to 24.3 A, giving roughly 360 W of charging power.

How does the AC input selector affect the PFC compliance?

The passive PFC meets EN61000-3-2 Class A whether the switch is set to 115 VAC or 230 VAC.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.