Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular metal power supply unit with built-in fan and AC voltage selector switch

Mean Well

Mean Well PB-360N-12 14.7V 24.3A Battery Charger Power Supply

SKU CH-04JZ-PJ9DE

Charges lead-acid batteries at 14.7V 24.3A with three-stage charging, selectable 115/230VAC input and passive PFC

  • TypeAT
  • Three-stage charging optimises lead-acid battery life
  • Selectable 115/230 VAC input suits global mains supplies
  • Built-in passive PFC meets EN61000-3-2 Class A
  • Comprehensive protection covers short circuit, reverse polarity, over-voltage and over-temperature
  • Fan runs only when charging current demands cooling

Lead-acid battery charger

The Mean Well PB-360N-12 is a single-output power supply designed to charge lead-acid batteries using a three-stage charging profile. It delivers 14.7V at up to 24.3A for use in backup power, industrial equipment or off-grid installations. The unit operates from AC mains selected by a 115/230VAC switch.

Input voltage selection and PFC

The charger accepts either 115VAC or 230VAC input set by a manual switch, so the installer must match the local mains voltage before connection. An optional built-in passive PFC function complies with EN61000-3-2 Class A for harmonic current limits. No active power factor correction is included.

Protection features and cooling

Built-in protections cover short circuit, reverse polarity, over voltage and over temperature conditions. A two-colour LED indicator shows the charging status at a glance. The fan runs only when charging current demands it, reducing noise during low-load periods. The AT form factor suits standard industrial mounting.

Puncte forte

  • Three-stage charging optimises lead-acid battery life
  • Selectable 115/230 VAC input suits global mains supplies
  • Built-in passive PFC meets EN61000-3-2 Class A
  • Comprehensive protection covers short circuit, reverse polarity, over-voltage and over-temperature
  • Fan runs only when charging current demands cooling

Specificații

TypeAT

Întrebări despre acest articol

Which output voltage should I pick for a 12 V lead-acid bank?

The unit delivers 14.7 V, which is the correct absorption voltage for a nominal 12 V lead-acid battery.

What does the 360 W rating mean when the charger is connected to a battery?

At 14.7 V the supply can provide up to 24.3 A, giving roughly 360 W of charging power.

How does the AC input selector affect the PFC compliance?

The passive PFC meets EN61000-3-2 Class A whether the switch is set to 115 VAC or 230 VAC.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.