BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
MSI
LGA 1151 ATX board with H270 chipset, dual-channel DDR4 to 2400 MHz, 64 GB max, two PCIe 3.0 x16 slots, six SATA ports and Realtek 7.1 audio
The MSI H270-A PRO is an Intel H270 motherboard for LGA 1151 processors. It supports 6th and 7th generation Intel Core i3, i5 and i7 CPUs plus Pentium and Celeron models. Dual-channel DDR4 memory runs at 2400 or 2133MHz up to a 64GB maximum. The board uses the standard ATX form factor.
This board suits owners of LGA 1151 processors who need a replacement H270 platform with 64GB memory headroom and multiple expansion slots. It provides two PCIe 3.0 x16 slots, four PCIe 3.0 x1 slots and six SATA III ports. Builders starting a new system or using 8th generation or newer Intel CPUs should choose a different socket and chipset.
The 64GB DDR4 limit is the key figure for capacity planning. Four DIMM slots accept dual-channel kits at 2400 or 2133MHz. If the workload requires more than 64GB of system memory, this motherboard cannot meet that requirement and a different platform must be selected.
| Brand | MSI |
|---|---|
| Series | MSI H270-A PRO |
| Model | MSI H270-A PRO |
| CPU Socket Type | LGA 1151 |
| CPU Type | Supports 6th/7th generation Intel Core ™ i3/i5/i7 processors, as well as Intel Pentium and Celeron processors with pin LGA1151 |
| Chipset | Intel H270 |
| Memory Standard | Supports dual-channel DDR4 2400/2133MHz memory |
| Maximum Memory Supported | 64GB |
| PCI Slots | 2 PCIe 3.0 x16 slots (supports x16/x4 modes) 4 PCIe 3.0 x1 slots |
| SATA RAID | 1XM.2 interface, 6xSATA III interface |
| Audio Chipset | Realtek ALC892 decoding chip - 7.1 channel high-quality sound effects |
| LAN Chipset | 1 Realtek RTL8111H Gigabit network interface card |
| Onboard USB | - 8 USB 3.1 Gen1 (SuperSpeed USB) ports (4 Type-A ports on the backplane, 4 via onboard USB ports) - 6 USB 2.0 (High-speed USB) ports (2 Type-A ports on the backplane, 4 via onboard USB ports) |
The board follows the standard ATX form factor, so it fits any case with ATX standoffs and the matching I/O shield cut-out.
Mount the board on ATX standoffs, attach the supplied I/O shield, connect the 24-pin and 4-pin power cables, then seat the LGA 1151 CPU, DDR4 modules and SATA cables; the step most often missed is fitting the I/O shield before the board.
The included CMOS battery keeps the real-time clock running and will need replacing when the system starts losing date and time after power-off.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?