BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
MSI
LGA 1151 ATX board with H270 chipset, dual-channel DDR4 to 2400 MHz, 64 GB max, two PCIe 3.0 x16 slots, six SATA ports and Realtek 7.1 audio
The MSI H270-A PRO is an Intel H270 motherboard for LGA 1151 processors. It supports 6th and 7th generation Intel Core i3, i5 and i7 CPUs plus Pentium and Celeron models. Dual-channel DDR4 memory runs at 2400 or 2133MHz up to a 64GB maximum. The board uses the standard ATX form factor.
This board suits owners of LGA 1151 processors who need a replacement H270 platform with 64GB memory headroom and multiple expansion slots. It provides two PCIe 3.0 x16 slots, four PCIe 3.0 x1 slots and six SATA III ports. Builders starting a new system or using 8th generation or newer Intel CPUs should choose a different socket and chipset.
The 64GB DDR4 limit is the key figure for capacity planning. Four DIMM slots accept dual-channel kits at 2400 or 2133MHz. If the workload requires more than 64GB of system memory, this motherboard cannot meet that requirement and a different platform must be selected.
| Brand | MSI |
|---|---|
| Series | MSI H270-A PRO |
| Model | MSI H270-A PRO |
| CPU Socket Type | LGA 1151 |
| CPU Type | Supports 6th/7th generation Intel Core ™ i3/i5/i7 processors, as well as Intel Pentium and Celeron processors with pin LGA1151 |
| Chipset | Intel H270 |
| Memory Standard | Supports dual-channel DDR4 2400/2133MHz memory |
| Maximum Memory Supported | 64GB |
| PCI Slots | 2 PCIe 3.0 x16 slots (supports x16/x4 modes) 4 PCIe 3.0 x1 slots |
| SATA RAID | 1XM.2 interface, 6xSATA III interface |
| Audio Chipset | Realtek ALC892 decoding chip - 7.1 channel high-quality sound effects |
| LAN Chipset | 1 Realtek RTL8111H Gigabit network interface card |
| Onboard USB | - 8 USB 3.1 Gen1 (SuperSpeed USB) ports (4 Type-A ports on the backplane, 4 via onboard USB ports) - 6 USB 2.0 (High-speed USB) ports (2 Type-A ports on the backplane, 4 via onboard USB ports) |
The board follows the standard ATX form factor, so it fits any case with ATX standoffs and the matching I/O shield cut-out.
Mount the board on ATX standoffs, attach the supplied I/O shield, connect the 24-pin and 4-pin power cables, then seat the LGA 1151 CPU, DDR4 modules and SATA cables; the step most often missed is fitting the I/O shield before the board.
The included CMOS battery keeps the real-time clock running and will need replacing when the system starts losing date and time after power-off.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?