Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green ATX motherboard with silver heatsinks and black slots

MSI

MSI H270-A PRO LGA 1151 Intel H270 DDR4 64GB ATX Motherboard

SKU CH-99WB-M7DCK

LGA 1151 ATX board with H270 chipset, dual-channel DDR4 to 2400 MHz, 64 GB max, two PCIe 3.0 x16 slots, six SATA ports and Realtek 7.1 audio

  • CPU Socket TypeLGA 1151
  • CPU TypeSupports 6th/7th generation Intel Core ™ i3/i5/i7 processors
  • ChipsetIntel H270
  • Memory StandardSupports dual-channel DDR4 2400/2133MHz memory
  • Maximum Memory Supported64GB
  • PCI Slots2 PCIe 3.0 x16 slots (supports x16/x4 modes) 4 PCIe 3.0 x1 s
  • Supports 6th and 7th generation Intel Core i3, i5, i7, Pentium and Celeron processors with LGA 1151 socket
  • Dual-channel DDR4 memory at 2400 or 2133 MHz up to 64 GB capacity
  • Two PCIe 3.0 x16 slots running at x16 or x4 plus four PCIe 3.0 x1 slots for expansion
  • One M.2 interface and six SATA III ports with RAID support
  • Realtek ALC892 7.1 channel audio and Realtek RTL8111H Gigabit LAN

LGA 1151 DDR4 ATX Motherboard

The MSI H270-A PRO is an Intel H270 motherboard for LGA 1151 processors. It supports 6th and 7th generation Intel Core i3, i5 and i7 CPUs plus Pentium and Celeron models. Dual-channel DDR4 memory runs at 2400 or 2133MHz up to a 64GB maximum. The board uses the standard ATX form factor.

Builders keeping 6th or 7th gen Intel CPUs

This board suits owners of LGA 1151 processors who need a replacement H270 platform with 64GB memory headroom and multiple expansion slots. It provides two PCIe 3.0 x16 slots, four PCIe 3.0 x1 slots and six SATA III ports. Builders starting a new system or using 8th generation or newer Intel CPUs should choose a different socket and chipset.

64GB DDR4 Maximum Memory

The 64GB DDR4 limit is the key figure for capacity planning. Four DIMM slots accept dual-channel kits at 2400 or 2133MHz. If the workload requires more than 64GB of system memory, this motherboard cannot meet that requirement and a different platform must be selected.

Helstu kostir

  • Supports 6th and 7th generation Intel Core i3, i5, i7, Pentium and Celeron processors with LGA 1151 socket
  • Dual-channel DDR4 memory at 2400 or 2133 MHz up to 64 GB capacity
  • Two PCIe 3.0 x16 slots running at x16 or x4 plus four PCIe 3.0 x1 slots for expansion
  • One M.2 interface and six SATA III ports with RAID support
  • Realtek ALC892 7.1 channel audio and Realtek RTL8111H Gigabit LAN

Tæknilýsing

BrandMSI
SeriesMSI H270-A PRO
ModelMSI H270-A PRO
CPU Socket TypeLGA 1151
CPU TypeSupports 6th/7th generation Intel Core ™ i3/i5/i7 processors, as well as Intel Pentium and Celeron processors with pin LGA1151
ChipsetIntel H270
Memory StandardSupports dual-channel DDR4 2400/2133MHz memory
Maximum Memory Supported64GB
PCI Slots2 PCIe 3.0 x16 slots (supports x16/x4 modes)
4 PCIe 3.0 x1 slots
SATA RAID1XM.2 interface, 6xSATA III interface
Audio ChipsetRealtek ALC892 decoding chip
- 7.1 channel high-quality sound effects
LAN Chipset1 Realtek RTL8111H Gigabit network interface card
Onboard USB- 8 USB 3.1 Gen1 (SuperSpeed USB) ports (4 Type-A ports on the backplane, 4 via onboard USB ports)
- 6 USB 2.0 (High-speed USB) ports (2 Type-A ports on the backplane, 4 via onboard USB ports)

Spurningar um þessa vöru

What size case and mounting pattern does the MSI H270-A PRO ATX board need?

The board follows the standard ATX form factor, so it fits any case with ATX standoffs and the matching I/O shield cut-out.

How is the board installed and which step is often missed?

Mount the board on ATX standoffs, attach the supplied I/O shield, connect the 24-pin and 4-pin power cables, then seat the LGA 1151 CPU, DDR4 modules and SATA cables; the step most often missed is fitting the I/O shield before the board.

Which on-board component will need replacement later?

The included CMOS battery keeps the real-time clock running and will need replacing when the system starts losing date and time after power-off.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.