NEMIX RAM 64GB (4×16GB) DDR4 3200 CL22 1.2V UDIMM memory upgrade for ASUS Pro Q670M-CE D4-CSM
- 64GB (4 x 16GB)
- 288-Pin DDR4 UDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
NEMIX RAM
A 32 GB DDR5 kit with two 16 GB UDIMMs running at 5600 MHz CL46 1.1 V, validated for the Supermicro X13SAQ motherboard
Size 32GB 2X16GB
This 32 GB kit contains two 16 GB UDIMM modules built to the DDR5 5600 standard. It matches the non-ECC unbuffered layout and 1.1 V operating voltage the X13SAQ memory controller expects so the system recognises the full capacity at rated speed.
Running at the specified 1.1 V means the modules draw only the power defined for DDR5 5600 operation. No heat spreader is fitted so airflow in a typical desktop chassis handles the thermal load without extra fan noise.
The jump is worth it if your current memory runs at a lower data rate or provides less than 32 GB total. Buyers who need ECC registered DIMMs or a different form factor cannot use this kit.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Align the notch on each 288-pin module with the slot key, press firmly until both side clips click shut, then verify in BIOS that both 16GB sticks are detected at 5600MHz; the step most often missed is checking the motherboard manual for the correct DIMM population order before seating the modules.
The modules have no heat spreader and no moving parts, so no routine maintenance is required; if a stick fails, the lifetime replacement warranty covers a direct swap of the defective 16GB module.
The primary limit is the CL46 latency at 5600MHz; without a heat spreader, prolonged high utilisation can raise module temperatures, which may cause the memory controller to throttle speed to maintain stability.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?