NEMIX RAM 64GB 4x16GB DDR4 2933MHz CL21 1Rx8 UDIMM memory upgrade
- 64GB (4 x 16GB)
- 288-Pin DDR4 UDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
NEMIX RAM
A 32 GB kit of four 8 GB DDR5 modules running at 5600 MT/s with CL46 latency and 1.1 V for the Supermicro X13SAW-F motherboard
Size 32GB 4X8GB
This 32 GB kit provides four 8 GB DDR5 UDIMMs rated at 5600 MT/s with CL46 latency and 1.10 V operation. The modules use 1Rx8 non-ECC unbuffered chips from major OEM suppliers and match the 288-pin layout the motherboard requires.
When a system shows reduced capacity or runs at lower speeds because of mixed ranks or voltages, this kit restores the full 32 GB at the board's native 5600 MT/s rating. The jump is worth it if the current memory does not meet the exact 1Rx8, 1.10 V, CL46 specification.
Buyers who need ECC error correction, registered modules, SODIMM form factor, or a different speed grade should look elsewhere. This kit is built only for non-ECC unbuffered desktop configurations that accept the stated timing and voltage.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-818K4 |
| Capacity | 32GB (4 x 8GB) |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB 4X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, the kit uses the 288-pin DDR5 UDIMM form factor that the X13SAW-F requires, so each module seats directly in the board's standard DIMM sockets.
Install the modules in the exact slot sequence shown in the Supermicro X13SAW-F manual; the board's memory-population rules determine which channels activate first and must be followed for all four sticks to be recognised.
No firmware or driver is required; the modules run at the rated DDR5 5600 CL46 1.1V settings once the system boots, provided the motherboard BIOS is current enough to support the memory controller.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?