NEMIX RAM 64GB (4×16GB) DDR4 3200 CL22 1.2V UDIMM memory upgrade for ASUS Pro Q670M-CE D4-CSM
- 64GB (4 x 16GB)
- 288-Pin DDR4 UDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
A 32 GB DDR5 kit with two 16 GB UDIMMs running at 5600 MHz CL46 1.1 V, validated for the Supermicro X13SAQ motherboard
Size 32GB 2X16GB
This 32 GB kit contains two 16 GB UDIMM modules built to the DDR5 5600 standard. It matches the non-ECC unbuffered layout and 1.1 V operating voltage the X13SAQ memory controller expects so the system recognises the full capacity at rated speed.
Running at the specified 1.1 V means the modules draw only the power defined for DDR5 5600 operation. No heat spreader is fitted so airflow in a typical desktop chassis handles the thermal load without extra fan noise.
The jump is worth it if your current memory runs at a lower data rate or provides less than 32 GB total. Buyers who need ECC registered DIMMs or a different form factor cannot use this kit.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Align the notch on each 288-pin module with the slot key, press firmly until both side clips click shut, then verify in BIOS that both 16GB sticks are detected at 5600MHz; the step most often missed is checking the motherboard manual for the correct DIMM population order before seating the modules.
The modules have no heat spreader and no moving parts, so no routine maintenance is required; if a stick fails, the lifetime replacement warranty covers a direct swap of the defective 16GB module.
The primary limit is the CL46 latency at 5600MHz; without a heat spreader, prolonged high utilisation can raise module temperatures, which may cause the memory controller to throttle speed to maintain stability.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?