Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green circuit boards with black chips and gold contacts lying side by side

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600MHz CL46 1.1V UDIMM for Supermicro X13SAQ

SKU CH-RZP0-4E6BD

A 32 GB DDR5 kit with two 16 GB UDIMMs running at 5600 MHz CL46 1.1 V, validated for the Supermicro X13SAQ motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • 32 GB dual-channel kit expands memory capacity for demanding workloads
  • DDR5 5600 MHz speed delivers high bandwidth for responsive performance
  • CL46 latency at 1.1 V ensures efficient operation within spec
  • 288-pin UDIMM form factor matches Supermicro X13SAQ motherboard requirements
  • Major OEM DRAM chips from Samsung, Micron or Hynix provide tested reliability

Exact DDR5 5600 upgrade for Supermicro X13SAQ

This 32 GB kit contains two 16 GB UDIMM modules built to the DDR5 5600 standard. It matches the non-ECC unbuffered layout and 1.1 V operating voltage the X13SAQ memory controller expects so the system recognises the full capacity at rated speed.

Standard JEDEC voltage keeps thermals and power low

Running at the specified 1.1 V means the modules draw only the power defined for DDR5 5600 operation. No heat spreader is fitted so airflow in a typical desktop chassis handles the thermal load without extra fan noise.

Replaces slower or smaller DDR5 kits

The jump is worth it if your current memory runs at a lower data rate or provides less than 32 GB total. Buyers who need ECC registered DIMMs or a different form factor cannot use this kit.

Points forts

  • 32 GB dual-channel kit expands memory capacity for demanding workloads
  • DDR5 5600 MHz speed delivers high bandwidth for responsive performance
  • CL46 latency at 1.1 V ensures efficient operation within spec
  • 288-pin UDIMM form factor matches Supermicro X13SAQ motherboard requirements
  • Major OEM DRAM chips from Samsung, Micron or Hynix provide tested reliability

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

How do I install the 288-pin DDR5 UDIMM modules on the Supermicro X13SAQ, and which step is often missed?

Align the notch on each 288-pin module with the slot key, press firmly until both side clips click shut, then verify in BIOS that both 16GB sticks are detected at 5600MHz; the step most often missed is checking the motherboard manual for the correct DIMM population order before seating the modules.

What maintenance or replacement will the 32GB DDR5 5600MHz kit need over its service life?

The modules have no heat spreader and no moving parts, so no routine maintenance is required; if a stick fails, the lifetime replacement warranty covers a direct swap of the defective 16GB module.

What limit appears first when the 1.1V CL46 DDR5 memory runs under sustained heavy workloads?

The primary limit is the CL46 latency at 5600MHz; without a heat spreader, prolonged high utilisation can raise module temperatures, which may cause the memory controller to throttle speed to maintain stability.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.