Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two green circuit boards with black chips and gold contacts lying side by side

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600MHz CL46 1.1V UDIMM for Supermicro X13SAQ

SKU CH-RZP0-4E6BD

A 32 GB DDR5 kit with two 16 GB UDIMMs running at 5600 MHz CL46 1.1 V, validated for the Supermicro X13SAQ motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • 32 GB dual-channel kit expands memory capacity for demanding workloads
  • DDR5 5600 MHz speed delivers high bandwidth for responsive performance
  • CL46 latency at 1.1 V ensures efficient operation within spec
  • 288-pin UDIMM form factor matches Supermicro X13SAQ motherboard requirements
  • Major OEM DRAM chips from Samsung, Micron or Hynix provide tested reliability

Exact DDR5 5600 upgrade for Supermicro X13SAQ

This 32 GB kit contains two 16 GB UDIMM modules built to the DDR5 5600 standard. It matches the non-ECC unbuffered layout and 1.1 V operating voltage the X13SAQ memory controller expects so the system recognises the full capacity at rated speed.

Standard JEDEC voltage keeps thermals and power low

Running at the specified 1.1 V means the modules draw only the power defined for DDR5 5600 operation. No heat spreader is fitted so airflow in a typical desktop chassis handles the thermal load without extra fan noise.

Replaces slower or smaller DDR5 kits

The jump is worth it if your current memory runs at a lower data rate or provides less than 32 GB total. Buyers who need ECC registered DIMMs or a different form factor cannot use this kit.

Pontos fortes

  • 32 GB dual-channel kit expands memory capacity for demanding workloads
  • DDR5 5600 MHz speed delivers high bandwidth for responsive performance
  • CL46 latency at 1.1 V ensures efficient operation within spec
  • 288-pin UDIMM form factor matches Supermicro X13SAQ motherboard requirements
  • Major OEM DRAM chips from Samsung, Micron or Hynix provide tested reliability

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How do I install the 288-pin DDR5 UDIMM modules on the Supermicro X13SAQ, and which step is often missed?

Align the notch on each 288-pin module with the slot key, press firmly until both side clips click shut, then verify in BIOS that both 16GB sticks are detected at 5600MHz; the step most often missed is checking the motherboard manual for the correct DIMM population order before seating the modules.

What maintenance or replacement will the 32GB DDR5 5600MHz kit need over its service life?

The modules have no heat spreader and no moving parts, so no routine maintenance is required; if a stick fails, the lifetime replacement warranty covers a direct swap of the defective 16GB module.

What limit appears first when the 1.1V CL46 DDR5 memory runs under sustained heavy workloads?

The primary limit is the CL46 latency at 5600MHz; without a heat spreader, prolonged high utilisation can raise module temperatures, which may cause the memory controller to throttle speed to maintain stability.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.