Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black plastic 2.5-inch SATA drive enclosure with vintage sticker design and USB 3.0 cable

Orico

Orico 2.5" SATA to USB 3.0 Drive Enclosure DIY Sticker 6TB

SKU CH-AVMW-9JB90

Converts a 2.5″ SATA drive into a USB 3.0 portable drive with UASP, tool-free installation, and auto-sleep protection up to 6TB

  • Size2.5"
  • ColorBlack
  • External InterfaceUSB 3.0
  • MaterialPlastic
  • Internal InterfaceSATA I/II/III
  • TypeEnclosure

External Interface USB 3.0

  • DIY vintage sticker design lets you personalise the enclosure
  • USB 3.0 with UASP delivers up to 5 Gbps transfer speeds
  • Tool-free installation swaps drives in about three seconds
  • 10-minute auto sleep protects the drive and extends its life
  • Fits 7 mm and 9.5 mm SATA drives up to 6 TB

DIY sticker enclosure for 2.5" SATA drives

This Orico enclosure turns a 2.5" SATA hard drive or SSD into a portable USB 3.0 device. It fits drives that are 7 mm or 9.5 mm thick and includes vintage-style stickers for customising the case. A 50 cm USB-A cable is supplied for immediate connection.

Single-bay design limited to 6 TB per drive

The enclosure accepts one SATA I, II or III drive with a maximum capacity of 6 TB. Drives measuring 12.5 mm thick are not recommended, so buyers needing larger or taller drives must choose a different enclosure.

UASP protocol reduces overhead during long transfers

With UASP enabled the SATA III link runs up to 70 % faster than standard USB 3.0 bulk transport. After 10 minutes of inactivity the unit enters an automatic sleep mode to protect the drive and lower power draw during extended sessions.

Priekšrocības

  • DIY vintage sticker design lets you personalise the enclosure
  • USB 3.0 with UASP delivers up to 5 Gbps transfer speeds
  • Tool-free installation swaps drives in about three seconds
  • 10-minute auto sleep protects the drive and extends its life
  • Fits 7 mm and 9.5 mm SATA drives up to 6 TB

Specifikācijas

BrandORICO
Size2.5"
ColorBlack
External InterfaceUSB 3.0
MaterialPlastic
Internal InterfaceSATA I/II/III
TypeEnclosure
HDD Count SupportedSingle HDD
Number of Bay1 Bay
Maximum Capacity (per Bay)Up to 6TB

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What real-world speed will I see from the 5 Gbps USB 3.0 port when the enclosure is in a computer?

The USB 3.0 interface tops out at 5 Gbps, and with UASP enabled the enclosure can reach about 70% faster throughput than a standard USB 3.0 link, so actual transfer rates will be limited by the drive and the host controller.

Does the USB 3.0 connection cap the performance of a SATA III drive inside the case?

Yes, the SATA III internal link can run at 6 Gbps, but the external USB 3.0 port is limited to 5 Gbps, so the enclosure becomes the bottleneck for any drive that can exceed that speed.

What drive heights fit the 2.5-inch bay and how do I secure a thinner unit?

The bay accepts 7 mm and 9.5 mm drives; a 12.5 mm drive is not recommended. For 7 mm drives you must use the included EVA foam spacer to fill the gap and prevent movement.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.