Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Black plastic 2.5-inch SATA drive enclosure with vintage sticker design and USB 3.0 cable

Orico

Orico 2.5" SATA to USB 3.0 Drive Enclosure DIY Sticker 6TB

SKU CH-AVMW-9JB90

Converts a 2.5″ SATA drive into a USB 3.0 portable drive with UASP, tool-free installation, and auto-sleep protection up to 6TB

  • Size2.5"
  • ColorBlack
  • External InterfaceUSB 3.0
  • MaterialPlastic
  • Internal InterfaceSATA I/II/III
  • TypeEnclosure

External Interface USB 3.0

  • DIY vintage sticker design lets you personalise the enclosure
  • USB 3.0 with UASP delivers up to 5 Gbps transfer speeds
  • Tool-free installation swaps drives in about three seconds
  • 10-minute auto sleep protects the drive and extends its life
  • Fits 7 mm and 9.5 mm SATA drives up to 6 TB

DIY sticker enclosure for 2.5" SATA drives

This Orico enclosure turns a 2.5" SATA hard drive or SSD into a portable USB 3.0 device. It fits drives that are 7 mm or 9.5 mm thick and includes vintage-style stickers for customising the case. A 50 cm USB-A cable is supplied for immediate connection.

Single-bay design limited to 6 TB per drive

The enclosure accepts one SATA I, II or III drive with a maximum capacity of 6 TB. Drives measuring 12.5 mm thick are not recommended, so buyers needing larger or taller drives must choose a different enclosure.

UASP protocol reduces overhead during long transfers

With UASP enabled the SATA III link runs up to 70 % faster than standard USB 3.0 bulk transport. After 10 minutes of inactivity the unit enters an automatic sleep mode to protect the drive and lower power draw during extended sessions.

Points forts

  • DIY vintage sticker design lets you personalise the enclosure
  • USB 3.0 with UASP delivers up to 5 Gbps transfer speeds
  • Tool-free installation swaps drives in about three seconds
  • 10-minute auto sleep protects the drive and extends its life
  • Fits 7 mm and 9.5 mm SATA drives up to 6 TB

Caractéristiques

BrandORICO
Size2.5"
ColorBlack
External InterfaceUSB 3.0
MaterialPlastic
Internal InterfaceSATA I/II/III
TypeEnclosure
HDD Count SupportedSingle HDD
Number of Bay1 Bay
Maximum Capacity (per Bay)Up to 6TB

Autres versions de ce modèle

3 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

What real-world speed will I see from the 5 Gbps USB 3.0 port when the enclosure is in a computer?

The USB 3.0 interface tops out at 5 Gbps, and with UASP enabled the enclosure can reach about 70% faster throughput than a standard USB 3.0 link, so actual transfer rates will be limited by the drive and the host controller.

Does the USB 3.0 connection cap the performance of a SATA III drive inside the case?

Yes, the SATA III internal link can run at 6 Gbps, but the external USB 3.0 port is limited to 5 Gbps, so the enclosure becomes the bottleneck for any drive that can exceed that speed.

What drive heights fit the 2.5-inch bay and how do I secure a thinner unit?

The bay accepts 7 mm and 9.5 mm drives; a 12.5 mm drive is not recommended. For 7 mm drives you must use the included EVA foam spacer to fill the gap and prevent movement.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.