Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black plastic 2.5-inch SATA drive enclosure with vintage sticker design and USB 3.0 cable

Orico

Orico 2.5" SATA to USB 3.0 Drive Enclosure DIY Sticker 6TB

SKU CH-AVMW-9JB90

Converts a 2.5″ SATA drive into a USB 3.0 portable drive with UASP, tool-free installation, and auto-sleep protection up to 6TB

  • Size2.5"
  • ColorBlack
  • External InterfaceUSB 3.0
  • MaterialPlastic
  • Internal InterfaceSATA I/II/III
  • TypeEnclosure

External Interface USB 3.0

  • DIY vintage sticker design lets you personalise the enclosure
  • USB 3.0 with UASP delivers up to 5 Gbps transfer speeds
  • Tool-free installation swaps drives in about three seconds
  • 10-minute auto sleep protects the drive and extends its life
  • Fits 7 mm and 9.5 mm SATA drives up to 6 TB

DIY sticker enclosure for 2.5" SATA drives

This Orico enclosure turns a 2.5" SATA hard drive or SSD into a portable USB 3.0 device. It fits drives that are 7 mm or 9.5 mm thick and includes vintage-style stickers for customising the case. A 50 cm USB-A cable is supplied for immediate connection.

Single-bay design limited to 6 TB per drive

The enclosure accepts one SATA I, II or III drive with a maximum capacity of 6 TB. Drives measuring 12.5 mm thick are not recommended, so buyers needing larger or taller drives must choose a different enclosure.

UASP protocol reduces overhead during long transfers

With UASP enabled the SATA III link runs up to 70 % faster than standard USB 3.0 bulk transport. After 10 minutes of inactivity the unit enters an automatic sleep mode to protect the drive and lower power draw during extended sessions.

I korthet

  • DIY vintage sticker design lets you personalise the enclosure
  • USB 3.0 with UASP delivers up to 5 Gbps transfer speeds
  • Tool-free installation swaps drives in about three seconds
  • 10-minute auto sleep protects the drive and extends its life
  • Fits 7 mm and 9.5 mm SATA drives up to 6 TB

Specifikationer

BrandORICO
Size2.5"
ColorBlack
External InterfaceUSB 3.0
MaterialPlastic
Internal InterfaceSATA I/II/III
TypeEnclosure
HDD Count SupportedSingle HDD
Number of Bay1 Bay
Maximum Capacity (per Bay)Up to 6TB

Andra versioner av den här modellen

3 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What real-world speed will I see from the 5 Gbps USB 3.0 port when the enclosure is in a computer?

The USB 3.0 interface tops out at 5 Gbps, and with UASP enabled the enclosure can reach about 70% faster throughput than a standard USB 3.0 link, so actual transfer rates will be limited by the drive and the host controller.

Does the USB 3.0 connection cap the performance of a SATA III drive inside the case?

Yes, the SATA III internal link can run at 6 Gbps, but the external USB 3.0 port is limited to 5 Gbps, so the enclosure becomes the bottleneck for any drive that can exceed that speed.

What drive heights fit the 2.5-inch bay and how do I secure a thinner unit?

The bay accepts 7 mm and 9.5 mm drives; a 12.5 mm drive is not recommended. For 7 mm drives you must use the included EVA foam spacer to fill the gap and prevent movement.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.