Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black plastic 2.5-inch SATA drive enclosure with vintage sticker design and USB 3.0 cable

Orico

Orico 2.5" SATA to USB 3.0 Drive Enclosure DIY Sticker 6TB

SKU CH-AVMW-9JB90

Converts a 2.5″ SATA drive into a USB 3.0 portable drive with UASP, tool-free installation, and auto-sleep protection up to 6TB

  • Size2.5"
  • ColorBlack
  • External InterfaceUSB 3.0
  • MaterialPlastic
  • Internal InterfaceSATA I/II/III
  • TypeEnclosure

External Interface USB 3.0

  • DIY vintage sticker design lets you personalise the enclosure
  • USB 3.0 with UASP delivers up to 5 Gbps transfer speeds
  • Tool-free installation swaps drives in about three seconds
  • 10-minute auto sleep protects the drive and extends its life
  • Fits 7 mm and 9.5 mm SATA drives up to 6 TB

DIY sticker enclosure for 2.5" SATA drives

This Orico enclosure turns a 2.5" SATA hard drive or SSD into a portable USB 3.0 device. It fits drives that are 7 mm or 9.5 mm thick and includes vintage-style stickers for customising the case. A 50 cm USB-A cable is supplied for immediate connection.

Single-bay design limited to 6 TB per drive

The enclosure accepts one SATA I, II or III drive with a maximum capacity of 6 TB. Drives measuring 12.5 mm thick are not recommended, so buyers needing larger or taller drives must choose a different enclosure.

UASP protocol reduces overhead during long transfers

With UASP enabled the SATA III link runs up to 70 % faster than standard USB 3.0 bulk transport. After 10 minutes of inactivity the unit enters an automatic sleep mode to protect the drive and lower power draw during extended sessions.

Punti di forza

  • DIY vintage sticker design lets you personalise the enclosure
  • USB 3.0 with UASP delivers up to 5 Gbps transfer speeds
  • Tool-free installation swaps drives in about three seconds
  • 10-minute auto sleep protects the drive and extends its life
  • Fits 7 mm and 9.5 mm SATA drives up to 6 TB

Caratteristiche tecniche

BrandORICO
Size2.5"
ColorBlack
External InterfaceUSB 3.0
MaterialPlastic
Internal InterfaceSATA I/II/III
TypeEnclosure
HDD Count SupportedSingle HDD
Number of Bay1 Bay
Maximum Capacity (per Bay)Up to 6TB

Altre versioni di questo modello

altri 3 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

What real-world speed will I see from the 5 Gbps USB 3.0 port when the enclosure is in a computer?

The USB 3.0 interface tops out at 5 Gbps, and with UASP enabled the enclosure can reach about 70% faster throughput than a standard USB 3.0 link, so actual transfer rates will be limited by the drive and the host controller.

Does the USB 3.0 connection cap the performance of a SATA III drive inside the case?

Yes, the SATA III internal link can run at 6 Gbps, but the external USB 3.0 port is limited to 5 Gbps, so the enclosure becomes the bottleneck for any drive that can exceed that speed.

What drive heights fit the 2.5-inch bay and how do I secure a thinner unit?

The bay accepts 7 mm and 9.5 mm drives; a 12.5 mm drive is not recommended. For 7 mm drives you must use the included EVA foam spacer to fill the gap and prevent movement.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.