OWC 16GB DDR4 3200MHz CL22 1RX8 SODIMM laptop RAM
- 16GB
- 260-Pin DDR4 SO-DIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
16 GB DDR4 ECC SODIMM at 2933 MHz with CL21 latency and 1.2 V for laptops and NAS systems
This 16GB DDR4 2933MHz CL21 ECC SODIMM targets laptops, all-in-one systems and NAS units that require error-correcting memory. The unbuffered 260-pin module operates at 1.2V and meets JEDEC specifications for reliable operation in compatible micro servers and POS equipment.
The module is backward compatible with 2666MHz, 2400MHz and 2133MHz slots, so it can replace older DDR4 sticks in supported platforms. The upgrade is worthwhile when the system accepts ECC unbuffered memory and the workload benefits from the higher 2933MHz data rate and single 16GB capacity.
In most cases the SODIMM installs without tools by opening the memory door and seating the 260-pin module until the clips lock. The usual pitfalls are attempting to use the stick in non-ECC consumer laptops, mixing it with registered DIMMs, or exceeding the platform's maximum supported memory per slot.
| Brand | OWC |
|---|---|
| Part Number | 2C9D41R816GB |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
This module uses the standard 260-pin DDR4 SO-DIMM form factor. It fits any laptop or all-in-one system that accepts DDR4 SO-DIMMs and is backward compatible with 2666MHz, 2400MHz and 2133MHz slots.
Align the notch on the module's gold edge with the key in the slot, insert at a slight angle, then press down firmly until both side clips click into place. The step many miss is pushing hard enough to engage both clips fully.
No ongoing maintenance is needed. The module has no heat spreader and runs at 1.2V. If a future platform requires non-ECC memory, the module would need to be replaced, but the memory itself does not degrade differently from standard DDR4.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?