OWC 16GB DDR4 3200MHz CL22 1RX8 SODIMM laptop RAM
- 16GB
- 260-Pin DDR4 SO-DIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
16 GB DDR4 ECC SODIMM at 2933 MHz with CL21 latency and 1.2 V for laptops and NAS systems
This 16GB DDR4 2933MHz CL21 ECC SODIMM targets laptops, all-in-one systems and NAS units that require error-correcting memory. The unbuffered 260-pin module operates at 1.2V and meets JEDEC specifications for reliable operation in compatible micro servers and POS equipment.
The module is backward compatible with 2666MHz, 2400MHz and 2133MHz slots, so it can replace older DDR4 sticks in supported platforms. The upgrade is worthwhile when the system accepts ECC unbuffered memory and the workload benefits from the higher 2933MHz data rate and single 16GB capacity.
In most cases the SODIMM installs without tools by opening the memory door and seating the 260-pin module until the clips lock. The usual pitfalls are attempting to use the stick in non-ECC consumer laptops, mixing it with registered DIMMs, or exceeding the platform's maximum supported memory per slot.
| Brand | OWC |
|---|---|
| Part Number | 2C9D41R816GB |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
This module uses the standard 260-pin DDR4 SO-DIMM form factor. It fits any laptop or all-in-one system that accepts DDR4 SO-DIMMs and is backward compatible with 2666MHz, 2400MHz and 2133MHz slots.
Align the notch on the module's gold edge with the key in the slot, insert at a slight angle, then press down firmly until both side clips click into place. The step many miss is pushing hard enough to engage both clips fully.
No ongoing maintenance is needed. The module has no heat spreader and runs at 1.2V. If a future platform requires non-ECC memory, the module would need to be replaced, but the memory itself does not degrade differently from standard DDR4.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟