OWC 64GB DDR4 2933MHz CL21 1.2V 288pin ECC Registered RDIMM memory upgrade
- 64GB
- 288-Pin DDR4 ECC RD…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
128GB DDR4 2933MHz ECC registered RDIMM for Supermicro X11 server motherboards
This 128GB DDR4 2933MHz CL21 registered module targets Supermicro X11DPG-SN, X11DPH-I, X11DPH-T, X11DPH-Tq and X11DPi-N motherboards. It delivers error-correcting, buffered memory for workloads that demand data integrity and high capacity. The kit is not compatible with standard desktop boards or unbuffered DIMMs.
Operating at 1.2V, the module runs without a heat spreader and relies on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping to keep power draw predictable during sustained server tasks. No active cooling is included or required by the specification.
The 288-pin DDR4 form factor fits the listed Supermicro server platforms and supports backward-compatible speeds of 2133MHz, 2400MHz and 2666MHz. ECC registration frees the memory controller from parity duties, while the 4Rx4 organisation maximises density per slot. Mixing with unbuffered memory is not supported.
| Brand | OWC |
|---|---|
| Part Number | 2R9D44R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11DPG-SN Supermicro Motherboard X11DPH-I Supermicro Motherboard X11DPH-T Supermicro Motherboard X11DPH-Tq Supermicro Motherboard X11DPi-N |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Power down the server, open the chassis, align the notch on the module with the slot key, press firmly until both ejector clips lock, then verify in BIOS that all 128GB are recognised at 2933MHz.
No scheduled maintenance is needed; ECC corrects single-bit errors on the fly, and the module should only be replaced if uncorrectable errors appear or a memory diagnostic reports a hard failure.
The registered buffer and 4Rx4 organisation add one clock cycle of latency, so the CL21 timing at 2933MHz becomes the primary latency ceiling before bandwidth or thermal limits are reached.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?