OWC 16GB DDR3 1600 ECC Registered RDIMM 2Rx4 1.5V 240-pin memory upgrade
- 16GB
- 240-Pin DDR3 ECC RD…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
32 GB kit of four 8 GB DDR3-1600 ECC registered RDIMMs for Supermicro SuperWorkstation 5037A and 7047A systems
Capacity 32GB (4 x 8GB)
This 32GB kit contains four 8GB DDR3 1600 registered DIMMs built for Supermicro SuperWorkstation 5037A and 7047A systems. It delivers ECC error correction and registered buffering required by those platforms. Standard desktop motherboards cannot use this memory and it must not be mixed with unbuffered modules.
Modules operate at the JEDEC-standard 1.5V without heat spreaders, relying on chassis airflow for cooling. Registered buffering adds minimal latency at CL11 while maintaining signal integrity across all four slots. Power consumption follows DDR3 1600 specifications for registered DIMMs under typical workloads.
The kit replaces Supermicro part MEMDR380LSL04ER16 and is validated for the named workstation series only. Buyers needing unbuffered ECC or non-ECC memory for consumer platforms cannot use these modules. Each stick carries OWC's limited lifetime warranty with free technical support and advanced replacement service.
| Brand | OWC |
|---|---|
| Part Number | 1R6D31R4032S |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperWorkstation 5037A Series Supermicro SuperWorkstation 7047A Series |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Power down, open the chassis, align each 240-pin module with the slot key and press firmly until both retention clips lock; the step often missed is populating all four slots as a matched kit so the registered ECC timings remain identical across channels.
The modules have no heat spreaders and no moving parts, so only periodic dust removal from the DIMM slots and verification that the 1.5 V supply remains stable are required; replacement is only necessary if a module fails memory diagnostics.
The registered buffer and CL11 latency at 1600 MHz set the throughput ceiling, so memory bandwidth saturates before temperature or voltage become constraints on these bare DRAM modules.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?