We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR3 ECC registered DIMMs in anti-static tray

OWC

OWC 32GB (4x8GB) DDR3 1600 CL11 1Rx4 240-pin 1.5V ECC Registered RDIMM Kit for Supermicro 5037A 7047A

SKU CH-YG43-24AX7

32 GB kit of four 8 GB DDR3-1600 ECC registered RDIMMs for Supermicro SuperWorkstation 5037A and 7047A systems

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit expands capacity across four 8 GB modules
  • DDR3 1600 CL11 speed matches system specifications
  • 5 V operation meets JEDEC standard for compatibility
  • Validated for Supermicro 5037A and 7047A workstations

System-Specific ECC RDIMM Kit

This 32GB kit contains four 8GB DDR3 1600 registered DIMMs built for Supermicro SuperWorkstation 5037A and 7047A systems. It delivers ECC error correction and registered buffering required by those platforms. Standard desktop motherboards cannot use this memory and it must not be mixed with unbuffered modules.

Thermals Noise and Power Draw

Modules operate at the JEDEC-standard 1.5V without heat spreaders, relying on chassis airflow for cooling. Registered buffering adds minimal latency at CL11 while maintaining signal integrity across all four slots. Power consumption follows DDR3 1600 specifications for registered DIMMs under typical workloads.

Compatibility and Upgrade Value

The kit replaces Supermicro part MEMDR380LSL04ER16 and is validated for the named workstation series only. Buyers needing unbuffered ECC or non-ECC memory for consumer platforms cannot use these modules. Each stick carries OWC's limited lifetime warranty with free technical support and advanced replacement service.

Highlights

  • ECC registered design protects data integrity in servers
  • 32 GB kit expands capacity across four 8 GB modules
  • DDR3 1600 CL11 speed matches system specifications
  • 5 V operation meets JEDEC standard for compatibility
  • Validated for Supermicro 5037A and 7047A workstations

Specifications

BrandOWC
Part Number1R6D31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperWorkstation 5037A Series
Supermicro SuperWorkstation 7047A Series

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the four 8 GB DDR3 1600 RDIMMs in my Supermicro 5037A or 7047A, and what step is often missed?

Power down, open the chassis, align each 240-pin module with the slot key and press firmly until both retention clips lock; the step often missed is populating all four slots as a matched kit so the registered ECC timings remain identical across channels.

What maintenance or replacement will this DDR3 ECC registered kit need over its service life?

The modules have no heat spreaders and no moving parts, so only periodic dust removal from the DIMM slots and verification that the 1.5 V supply remains stable are required; replacement is only necessary if a module fails memory diagnostics.

What limit appears first when the 32 GB kit runs sustained workloads at CL11 1600 MHz?

The registered buffer and CL11 latency at 1600 MHz set the throughput ceiling, so memory bandwidth saturates before temperature or voltage become constraints on these bare DRAM modules.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.