NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
32 GB DDR4 ECC registered RDIMM running at 2933 MHz CL21 for servers and workstations
This 32 GB DDR4 registered DIMM runs at 2933 MHz with CL21 latency and 1.2 V operation. It is built to JEDEC PC4-23400 specifications and carries ECC protection for data integrity. The module targets servers, workstations and NAS systems that require registered memory. It will not function in standard desktop platforms or alongside unbuffered DIMMs.
At the rated 2933 MHz the module sustains its CL21 timings without dropping to lower frequencies during prolonged workloads. ECC circuitry corrects single-bit errors on the fly while the registered buffer reduces electrical load on the memory controller. This combination keeps bandwidth stable in multi-socket servers and virtualization hosts that run memory-intensive tasks for hours.
The DDR4 standard caps this design at 1.2 V and the PC4-23400 data rate, so no higher JEDEC speed grade exists for this voltage. The module will automatically clock down to 2133 MHz, 2400 MHz or 2666 MHz when paired with older controllers that do not support 2933 MHz. Mixing with unbuffered DIMMs or installing in consumer motherboards remains unsupported by the DDR4 registered specification.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
Each module operates at the standard DDR4 1.2 V, keeping power draw low even under sustained 24/7 server workloads.
The board needs a 288-pin DDR4 slot that supports ECC registered memory; standard desktop boards that only accept unbuffered DIMMs will not work.
Yes, the module is backward-compatible with those speeds and will run at the lowest common frequency when mixed.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?