NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
32 GB DDR4 ECC registered RDIMM running at 2933 MHz CL21 for servers and workstations
This 32 GB DDR4 registered DIMM runs at 2933 MHz with CL21 latency and 1.2 V operation. It is built to JEDEC PC4-23400 specifications and carries ECC protection for data integrity. The module targets servers, workstations and NAS systems that require registered memory. It will not function in standard desktop platforms or alongside unbuffered DIMMs.
At the rated 2933 MHz the module sustains its CL21 timings without dropping to lower frequencies during prolonged workloads. ECC circuitry corrects single-bit errors on the fly while the registered buffer reduces electrical load on the memory controller. This combination keeps bandwidth stable in multi-socket servers and virtualization hosts that run memory-intensive tasks for hours.
The DDR4 standard caps this design at 1.2 V and the PC4-23400 data rate, so no higher JEDEC speed grade exists for this voltage. The module will automatically clock down to 2133 MHz, 2400 MHz or 2666 MHz when paired with older controllers that do not support 2933 MHz. Mixing with unbuffered DIMMs or installing in consumer motherboards remains unsupported by the DDR4 registered specification.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
Each module operates at the standard DDR4 1.2 V, keeping power draw low even under sustained 24/7 server workloads.
The board needs a 288-pin DDR4 slot that supports ECC registered memory; standard desktop boards that only accept unbuffered DIMMs will not work.
Yes, the module is backward-compatible with those speeds and will run at the lowest common frequency when mixed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?