EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
OWC
32 GB DDR4 ECC registered RDIMM running at 2933 MHz CL21 for servers and workstations
This 32 GB DDR4 registered DIMM runs at 2933 MHz with CL21 latency and 1.2 V operation. It is built to JEDEC PC4-23400 specifications and carries ECC protection for data integrity. The module targets servers, workstations and NAS systems that require registered memory. It will not function in standard desktop platforms or alongside unbuffered DIMMs.
At the rated 2933 MHz the module sustains its CL21 timings without dropping to lower frequencies during prolonged workloads. ECC circuitry corrects single-bit errors on the fly while the registered buffer reduces electrical load on the memory controller. This combination keeps bandwidth stable in multi-socket servers and virtualization hosts that run memory-intensive tasks for hours.
The DDR4 standard caps this design at 1.2 V and the PC4-23400 data rate, so no higher JEDEC speed grade exists for this voltage. The module will automatically clock down to 2133 MHz, 2400 MHz or 2666 MHz when paired with older controllers that do not support 2933 MHz. Mixing with unbuffered DIMMs or installing in consumer motherboards remains unsupported by the DDR4 registered specification.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
Each module operates at the standard DDR4 1.2 V, keeping power draw low even under sustained 24/7 server workloads.
The board needs a 288-pin DDR4 slot that supports ECC registered memory; standard desktop boards that only accept unbuffered DIMMs will not work.
Yes, the module is backward-compatible with those speeds and will run at the lowest common frequency when mixed.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?