OWC
OWC 32GB DDR4 2933MHz ECC Registered RDIMM 2Rx4 CL21 1.2V for Kingston KSM29RD4/32MEI server RAM
32 GB DDR4 ECC registered RDIMM running at 2933 MHz CL21 for servers and workstations
- Capacity32GB
- Type288-Pin DDR4 ECC RDIMM
- SpeedDDR4 2933 (PC4 23400)
- CAS LatencyCL21
- Voltage1.2V
- ECCYes
- 32 GB capacity expands server memory headroom
- DDR4 2933 MHz CL21 speed matches Kingston KSM29RD4/32MEI spec
- ECC registered design protects data integrity in workloads
- 2 V operation reduces power draw per module
- Backward compatible with 2133, 2400 and 2666 MHz systems
Server-grade ECC RDIMM for workstations and NAS
This 32 GB DDR4 registered DIMM runs at 2933 MHz with CL21 latency and 1.2 V operation. It is built to JEDEC PC4-23400 specifications and carries ECC protection for data integrity. The module targets servers, workstations and NAS systems that require registered memory. It will not function in standard desktop platforms or alongside unbuffered DIMMs.
Steady throughput at rated speed under continuous
At the rated 2933 MHz the module sustains its CL21 timings without dropping to lower frequencies during prolonged workloads. ECC circuitry corrects single-bit errors on the fly while the registered buffer reduces electrical load on the memory controller. This combination keeps bandwidth stable in multi-socket servers and virtualization hosts that run memory-intensive tasks for hours.
JEDEC DDR4 limits and backward-compatible speeds
The DDR4 standard caps this design at 1.2 V and the PC4-23400 data rate, so no higher JEDEC speed grade exists for this voltage. The module will automatically clock down to 2133 MHz, 2400 MHz or 2666 MHz when paired with older controllers that do not support 2933 MHz. Mixing with unbuffered DIMMs or installing in consumer motherboards remains unsupported by the DDR4 registered specification.
Акценти
- 32 GB capacity expands server memory headroom
- DDR4 2933 MHz CL21 speed matches Kingston KSM29RD4/32MEI spec
- ECC registered design protects data integrity in workloads
- 2 V operation reduces power draw per module
- Backward compatible with 2133, 2400 and 2666 MHz systems
Спецификации
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
Въпроси за този артикул
How much power does the 1.2 V DDR4 2933 MHz module draw when the server runs continuously?
Each module operates at the standard DDR4 1.2 V, keeping power draw low even under sustained 24/7 server workloads.
What motherboard slot and memory type must the system already have for this 288-pin ECC registered RDIMM to work?
The board needs a 288-pin DDR4 slot that supports ECC registered memory; standard desktop boards that only accept unbuffered DIMMs will not work.
Will this 2933 MHz CL21 kit run stably alongside existing 2133 MHz, 2400 MHz or 2666 MHz DDR4 ECC registered modules?
Yes, the module is backward-compatible with those speeds and will run at the lowest common frequency when mixed.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.



