NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
OWC
32 GB DDR4 ECC registered RDIMM running at 2933 MHz CL21 for servers and workstations
This 32 GB DDR4 registered DIMM runs at 2933 MHz with CL21 latency and 1.2 V operation. It is built to JEDEC PC4-23400 specifications and carries ECC protection for data integrity. The module targets servers, workstations and NAS systems that require registered memory. It will not function in standard desktop platforms or alongside unbuffered DIMMs.
At the rated 2933 MHz the module sustains its CL21 timings without dropping to lower frequencies during prolonged workloads. ECC circuitry corrects single-bit errors on the fly while the registered buffer reduces electrical load on the memory controller. This combination keeps bandwidth stable in multi-socket servers and virtualization hosts that run memory-intensive tasks for hours.
The DDR4 standard caps this design at 1.2 V and the PC4-23400 data rate, so no higher JEDEC speed grade exists for this voltage. The module will automatically clock down to 2133 MHz, 2400 MHz or 2666 MHz when paired with older controllers that do not support 2933 MHz. Mixing with unbuffered DIMMs or installing in consumer motherboards remains unsupported by the DDR4 registered specification.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
Each module operates at the standard DDR4 1.2 V, keeping power draw low even under sustained 24/7 server workloads.
The board needs a 288-pin DDR4 slot that supports ECC registered memory; standard desktop boards that only accept unbuffered DIMMs will not work.
Yes, the module is backward-compatible with those speeds and will run at the lowest common frequency when mixed.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?