SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Seagate
A 4 TB 3.5-inch internal hard drive with a SATA 6.0 Gb/s interface, 5900 RPM spindle speed and 64 MB cache for enterprise bulk storage
The Seagate ST4000NC001 is a 4TB 3.5-inch internal hard drive built for enterprise storage arrays. It connects via a SATA 6.0Gb/s interface and spins at 5900 RPM with 64MB of cache. The bare drive is sold new and rated for continuous operation in multi-drive environments.
The key specification is a sustained read data rate up to 170 MB/s, which sets realistic expectations for bulk data transfer. Average latency is 5.1ms and operating power stays under 4.3 Watts. These figures determine whether the drive meets throughput and thermal targets for high-density deployments.
This drive suits builders scaling out cost-effective, low-power storage for unstructured data in datacenters or cloud archives. It is not for workloads demanding low-latency random access or high IOPS, such as primary databases or virtualisation hosts. Buyers needing faster access times or higher spindle speeds should look at performance-class drives.
| Brand | Seagate |
|---|---|
| Model | ST4000NC001 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 4TB |
| RPM | 5900 RPM |
| Cache | 64MB |
| Average Latency | 5.1ms |
| Features | HDD Capacity to Grow On -4TB drives for maximum scalability -Energy efficient at under 4.3Watts operating power -SATA 6Gb/s interface for easy integration Reliable HDD and Low-Power for Efficient Storage -Enterprise-ready RV tolerance for efficient multi-drive systems -Bad-block management (BBM) and improved error detection -Lowest power consumption in a 3.5-inch form factor Secure and Easy Drive Disposal -Every day, thousands of terabytes of data leave data centers as old systems are retired -Seagate Instant Secure Erase feature renders all data on the hard drive unreadable in a mat |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| Sūtījuma svars | 2.12 kg |
| Sūtījuma izmēri | 168 × 122 × 36 mm |
It is the maximum sequential throughput the drive can deliver over the SATA 6.0 Gb/s link; random workloads and system overhead will reduce everyday speeds.
The interface limits burst transfers to 6.0 Gb/s, so the drive cannot exceed that ceiling even if its internal media were faster.
It requires a standard 3.5-inch drive bay with SATA data and power connectors and mounting screws.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?