SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Seagate
A 4 TB 3.5-inch internal hard drive with a SATA 6.0 Gb/s interface, 5900 RPM spindle speed and 64 MB cache for enterprise bulk storage
The Seagate ST4000NC001 is a 4TB 3.5-inch internal hard drive built for enterprise storage arrays. It connects via a SATA 6.0Gb/s interface and spins at 5900 RPM with 64MB of cache. The bare drive is sold new and rated for continuous operation in multi-drive environments.
The key specification is a sustained read data rate up to 170 MB/s, which sets realistic expectations for bulk data transfer. Average latency is 5.1ms and operating power stays under 4.3 Watts. These figures determine whether the drive meets throughput and thermal targets for high-density deployments.
This drive suits builders scaling out cost-effective, low-power storage for unstructured data in datacenters or cloud archives. It is not for workloads demanding low-latency random access or high IOPS, such as primary databases or virtualisation hosts. Buyers needing faster access times or higher spindle speeds should look at performance-class drives.
| Brand | Seagate |
|---|---|
| Model | ST4000NC001 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 4TB |
| RPM | 5900 RPM |
| Cache | 64MB |
| Average Latency | 5.1ms |
| Features | HDD Capacity to Grow On -4TB drives for maximum scalability -Energy efficient at under 4.3Watts operating power -SATA 6Gb/s interface for easy integration Reliable HDD and Low-Power for Efficient Storage -Enterprise-ready RV tolerance for efficient multi-drive systems -Bad-block management (BBM) and improved error detection -Lowest power consumption in a 3.5-inch form factor Secure and Easy Drive Disposal -Every day, thousands of terabytes of data leave data centers as old systems are retired -Seagate Instant Secure Erase feature renders all data on the hard drive unreadable in a mat |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| Тегло на пратката | 2.12 kg |
| Размери на опаковката | 168 × 122 × 36 mm |
It is the maximum sequential throughput the drive can deliver over the SATA 6.0 Gb/s link; random workloads and system overhead will reduce everyday speeds.
The interface limits burst transfers to 6.0 Gb/s, so the drive cannot exceed that ceiling even if its internal media were faster.
It requires a standard 3.5-inch drive bay with SATA data and power connectors and mounting screws.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?