暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch bare internal hard drive, SATA connectors visible

Seagate

Seagate ST4000NC001 4TB 5900 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-B93B-QGH13 MPN ST4000NC001

A 4 TB 3.5-inch internal hard drive with a SATA 6.0 Gb/s interface, 5900 RPM spindle speed and 64 MB cache for enterprise bulk storage

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity4TB
  • RPM5900 RPM
  • Cache64MB
  • Average Latency5.1ms
  • 4TB capacity scales bulk storage for data centers
  • 5900 RPM spindle delivers up to 170 MB/s sustained reads
  • 64 MB cache buffers bursts for smoother throughput
  • SATA 6.0 Gb/s interface enables easy integration
  • Under 4.3 Watts operating power cuts energy and cooling costs

Capacity and Interface

The Seagate ST4000NC001 is a 4TB 3.5-inch internal hard drive built for enterprise storage arrays. It connects via a SATA 6.0Gb/s interface and spins at 5900 RPM with 64MB of cache. The bare drive is sold new and rated for continuous operation in multi-drive environments.

Sustained Throughput

The key specification is a sustained read data rate up to 170 MB/s, which sets realistic expectations for bulk data transfer. Average latency is 5.1ms and operating power stays under 4.3 Watts. These figures determine whether the drive meets throughput and thermal targets for high-density deployments.

Suited for Bulk Archives

This drive suits builders scaling out cost-effective, low-power storage for unstructured data in datacenters or cloud archives. It is not for workloads demanding low-latency random access or high IOPS, such as primary databases or virtualisation hosts. Buyers needing faster access times or higher spindle speeds should look at performance-class drives.

特長

  • 4TB capacity scales bulk storage for data centers
  • 5900 RPM spindle delivers up to 170 MB/s sustained reads
  • 64 MB cache buffers bursts for smoother throughput
  • SATA 6.0 Gb/s interface enables easy integration
  • Under 4.3 Watts operating power cuts energy and cooling costs

仕様

BrandSeagate
ModelST4000NC001
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity4TB
RPM5900 RPM
Cache64MB
Average Latency5.1ms
FeaturesHDD Capacity to Grow On
-4TB drives for maximum scalability
-Energy efficient at under 4.3Watts operating power
-SATA 6Gb/s interface for easy integration
Reliable HDD and Low-Power for Efficient Storage
-Enterprise-ready RV tolerance for efficient multi-drive systems
-Bad-block management (BBM) and improved error detection
-Lowest power consumption in a 3.5-inch form factor
Secure and Easy Drive Disposal
-Every day, thousands of terabytes of data leave data centers as old systems are retired
-Seagate Instant Secure Erase feature renders all data on the hard drive unreadable in a mat
UsageFor Enterprise Storage
Form Factor3.5"
配送重量2.12 kg
梱包サイズ168 × 122 × 36 mm

この商品に関する質問

What does the 170 MB/s sustained read rate mean once the drive is installed in a real machine?

It is the maximum sequential throughput the drive can deliver over the SATA 6.0 Gb/s link; random workloads and system overhead will reduce everyday speeds.

What does the SATA 6.0 Gb/s interface cap in practice?

The interface limits burst transfers to 6.0 Gb/s, so the drive cannot exceed that ceiling even if its internal media were faster.

What does the 3.5-inch form factor need to fit or mount in a system?

It requires a standard 3.5-inch drive bay with SATA data and power connectors and mounting screws.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。