SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Seagate
A 4 TB 3.5-inch internal hard drive with a SATA 6.0 Gb/s interface, 5900 RPM spindle speed and 64 MB cache for enterprise bulk storage
The Seagate ST4000NC001 is a 4TB 3.5-inch internal hard drive built for enterprise storage arrays. It connects via a SATA 6.0Gb/s interface and spins at 5900 RPM with 64MB of cache. The bare drive is sold new and rated for continuous operation in multi-drive environments.
The key specification is a sustained read data rate up to 170 MB/s, which sets realistic expectations for bulk data transfer. Average latency is 5.1ms and operating power stays under 4.3 Watts. These figures determine whether the drive meets throughput and thermal targets for high-density deployments.
This drive suits builders scaling out cost-effective, low-power storage for unstructured data in datacenters or cloud archives. It is not for workloads demanding low-latency random access or high IOPS, such as primary databases or virtualisation hosts. Buyers needing faster access times or higher spindle speeds should look at performance-class drives.
| Brand | Seagate |
|---|---|
| Model | ST4000NC001 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 4TB |
| RPM | 5900 RPM |
| Cache | 64MB |
| Average Latency | 5.1ms |
| Features | HDD Capacity to Grow On -4TB drives for maximum scalability -Energy efficient at under 4.3Watts operating power -SATA 6Gb/s interface for easy integration Reliable HDD and Low-Power for Efficient Storage -Enterprise-ready RV tolerance for efficient multi-drive systems -Bad-block management (BBM) and improved error detection -Lowest power consumption in a 3.5-inch form factor Secure and Easy Drive Disposal -Every day, thousands of terabytes of data leave data centers as old systems are retired -Seagate Instant Secure Erase feature renders all data on the hard drive unreadable in a mat |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| Teža pošiljke | 2.12 kg |
| Velikost pošiljke | 168 × 122 × 36 mm |
It is the maximum sequential throughput the drive can deliver over the SATA 6.0 Gb/s link; random workloads and system overhead will reduce everyday speeds.
The interface limits burst transfers to 6.0 Gb/s, so the drive cannot exceed that ceiling even if its internal media were faster.
It requires a standard 3.5-inch drive bay with SATA data and power connectors and mounting screws.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?