نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver 3.5 inch bare internal hard drive, SATA connectors visible

Seagate

Seagate ST4000NC001 4TB 5900 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-B93B-QGH13 MPN ST4000NC001

A 4 TB 3.5-inch internal hard drive with a SATA 6.0 Gb/s interface, 5900 RPM spindle speed and 64 MB cache for enterprise bulk storage

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity4TB
  • RPM5900 RPM
  • Cache64MB
  • Average Latency5.1ms
  • 4TB capacity scales bulk storage for data centers
  • 5900 RPM spindle delivers up to 170 MB/s sustained reads
  • 64 MB cache buffers bursts for smoother throughput
  • SATA 6.0 Gb/s interface enables easy integration
  • Under 4.3 Watts operating power cuts energy and cooling costs

Capacity and Interface

The Seagate ST4000NC001 is a 4TB 3.5-inch internal hard drive built for enterprise storage arrays. It connects via a SATA 6.0Gb/s interface and spins at 5900 RPM with 64MB of cache. The bare drive is sold new and rated for continuous operation in multi-drive environments.

Sustained Throughput

The key specification is a sustained read data rate up to 170 MB/s, which sets realistic expectations for bulk data transfer. Average latency is 5.1ms and operating power stays under 4.3 Watts. These figures determine whether the drive meets throughput and thermal targets for high-density deployments.

Suited for Bulk Archives

This drive suits builders scaling out cost-effective, low-power storage for unstructured data in datacenters or cloud archives. It is not for workloads demanding low-latency random access or high IOPS, such as primary databases or virtualisation hosts. Buyers needing faster access times or higher spindle speeds should look at performance-class drives.

أبرز المميزات

  • 4TB capacity scales bulk storage for data centers
  • 5900 RPM spindle delivers up to 170 MB/s sustained reads
  • 64 MB cache buffers bursts for smoother throughput
  • SATA 6.0 Gb/s interface enables easy integration
  • Under 4.3 Watts operating power cuts energy and cooling costs

المواصفات

BrandSeagate
ModelST4000NC001
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity4TB
RPM5900 RPM
Cache64MB
Average Latency5.1ms
FeaturesHDD Capacity to Grow On
-4TB drives for maximum scalability
-Energy efficient at under 4.3Watts operating power
-SATA 6Gb/s interface for easy integration
Reliable HDD and Low-Power for Efficient Storage
-Enterprise-ready RV tolerance for efficient multi-drive systems
-Bad-block management (BBM) and improved error detection
-Lowest power consumption in a 3.5-inch form factor
Secure and Easy Drive Disposal
-Every day, thousands of terabytes of data leave data centers as old systems are retired
-Seagate Instant Secure Erase feature renders all data on the hard drive unreadable in a mat
UsageFor Enterprise Storage
Form Factor3.5"
وزن الشحنة2.12 kg
أبعاد الطرد168 × 122 × 36 mm

أسئلة حول هذا المنتج

What does the 170 MB/s sustained read rate mean once the drive is installed in a real machine?

It is the maximum sequential throughput the drive can deliver over the SATA 6.0 Gb/s link; random workloads and system overhead will reduce everyday speeds.

What does the SATA 6.0 Gb/s interface cap in practice?

The interface limits burst transfers to 6.0 Gb/s, so the drive cannot exceed that ceiling even if its internal media were faster.

What does the 3.5-inch form factor need to fit or mount in a system?

It requires a standard 3.5-inch drive bay with SATA data and power connectors and mounting screws.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.