Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 70mm square case fan with 3-pin connector

Zyvpee

Zyvpee 2810KL-04W-B39 EA1 70mm 3-pin case fan

SKU CH-BX0D-6JV02

70 mm ball-bearing case fan with 3-pin connector runs at 12 V and 0.19 A for CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Ball bearing ensures smooth, quiet operation
  • 70 mm x 15 mm frame fits compact chassis
  • 12 V 0.19 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Black non-LED design suits stealth builds

70 mm Ball-Bearing Case Fan

This Zyvpee 70 mm case fan uses a ball bearing and a 3-pin power connector. It runs on 12 V at 0.19 A and measures 70 by 15 mm. The black frame has no LED lighting. It is built for CPU cooling in compact chassis.

Suits tight builds needing a 70 mm replacement

The 70 mm footprint fits small form-factor cases and legacy coolers that cannot accept larger fans. The 3-pin connector provides basic voltage control without PWM. Builders who need a 25 mm thick fan or PWM speed regulation should look elsewhere.

3-pin voltage control decides compatibility

The fan connects through a standard 3-pin header, so speed varies with voltage only. If the motherboard or controller supplies only 4-pin PWM headers without voltage-mode fallback, the fan will run at full speed. Check the header type before purchase.

Priekšrocības

  • Ball bearing ensures smooth, quiet operation
  • 70 mm x 15 mm frame fits compact chassis
  • 12 V 0.19 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Black non-LED design suits stealth builds

Specifikācijas

BrandZyvpee
Series2810KL-04W-B39 EA1
Model2810KL-04W-B39
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions70*15MM

Jautājumi par šo preci

How do I install the 70 mm fan with its 3-pin connector?

Align the four screw holes with the chassis or heatsink mounts, insert screws through the 70 mm frame, and press the 3-pin plug onto the motherboard header matching the keyed guide.

What maintenance will the ball-bearing fan need later?

The sealed ball bearing is lubricated for life; only occasional dust removal from the blades and frame with compressed air is required.

What limit appears first during sustained operation at 12 V?

The fixed 0.19 A current draw caps the motor torque, so the 70 mm impeller cannot increase airflow beyond its rated speed regardless of load.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.