Zyvpee
Zyvpee 2810KL-04W-B39 EA1 70mm 3-pin case fan
70 mm ball-bearing case fan with 3-pin connector runs at 12 V and 0.19 A for CPU cooling
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Cooling
- Ball bearing ensures smooth, quiet operation
- 70 mm x 15 mm frame fits compact chassis
- 12 V 0.19 A draw keeps power use low
- Three-pin connector enables speed monitoring
- Black non-LED design suits stealth builds
70 mm Ball-Bearing Case Fan
This Zyvpee 70 mm case fan uses a ball bearing and a 3-pin power connector. It runs on 12 V at 0.19 A and measures 70 by 15 mm. The black frame has no LED lighting. It is built for CPU cooling in compact chassis.
Suits tight builds needing a 70 mm replacement
The 70 mm footprint fits small form-factor cases and legacy coolers that cannot accept larger fans. The 3-pin connector provides basic voltage control without PWM. Builders who need a 25 mm thick fan or PWM speed regulation should look elsewhere.
3-pin voltage control decides compatibility
The fan connects through a standard 3-pin header, so speed varies with voltage only. If the motherboard or controller supplies only 4-pin PWM headers without voltage-mode fallback, the fan will run at full speed. Check the header type before purchase.
주요 특징
- Ball bearing ensures smooth, quiet operation
- 70 mm x 15 mm frame fits compact chassis
- 12 V 0.19 A draw keeps power use low
- Three-pin connector enables speed monitoring
- Black non-LED design suits stealth builds
사양
| Brand | Zyvpee |
|---|---|
| Series | 2810KL-04W-B39 EA1 |
| Model | 2810KL-04W-B39 |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 70*15MM |
이 상품에 대한 질문
How do I install the 70 mm fan with its 3-pin connector?
Align the four screw holes with the chassis or heatsink mounts, insert screws through the 70 mm frame, and press the 3-pin plug onto the motherboard header matching the keyed guide.
What maintenance will the ball-bearing fan need later?
The sealed ball bearing is lubricated for life; only occasional dust removal from the blades and frame with compressed air is required.
What limit appears first during sustained operation at 12 V?
The fixed 0.19 A current draw caps the motor torque, so the 70 mm impeller cannot increase airflow beyond its rated speed regardless of load.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001049BTC
재고 있음