Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 70mm square case fan with 3-pin connector

Zyvpee

Zyvpee 2810KL-04W-B39 EA1 70mm 3-pin case fan

SKU CH-BX0D-6JV02

70 mm ball-bearing case fan with 3-pin connector runs at 12 V and 0.19 A for CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Ball bearing ensures smooth, quiet operation
  • 70 mm x 15 mm frame fits compact chassis
  • 12 V 0.19 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Black non-LED design suits stealth builds

70 mm Ball-Bearing Case Fan

This Zyvpee 70 mm case fan uses a ball bearing and a 3-pin power connector. It runs on 12 V at 0.19 A and measures 70 by 15 mm. The black frame has no LED lighting. It is built for CPU cooling in compact chassis.

Suits tight builds needing a 70 mm replacement

The 70 mm footprint fits small form-factor cases and legacy coolers that cannot accept larger fans. The 3-pin connector provides basic voltage control without PWM. Builders who need a 25 mm thick fan or PWM speed regulation should look elsewhere.

3-pin voltage control decides compatibility

The fan connects through a standard 3-pin header, so speed varies with voltage only. If the motherboard or controller supplies only 4-pin PWM headers without voltage-mode fallback, the fan will run at full speed. Check the header type before purchase.

Puncte forte

  • Ball bearing ensures smooth, quiet operation
  • 70 mm x 15 mm frame fits compact chassis
  • 12 V 0.19 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Black non-LED design suits stealth builds

Specificații

BrandZyvpee
Series2810KL-04W-B39 EA1
Model2810KL-04W-B39
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions70*15MM

Întrebări despre acest articol

How do I install the 70 mm fan with its 3-pin connector?

Align the four screw holes with the chassis or heatsink mounts, insert screws through the 70 mm frame, and press the 3-pin plug onto the motherboard header matching the keyed guide.

What maintenance will the ball-bearing fan need later?

The sealed ball bearing is lubricated for life; only occasional dust removal from the blades and frame with compressed air is required.

What limit appears first during sustained operation at 12 V?

The fixed 0.19 A current draw caps the motor torque, so the 70 mm impeller cannot increase airflow beyond its rated speed regardless of load.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.