Zyvpee
Zyvpee 2810KL-04W-B39 EA1 70mm 3-pin case fan
70 mm ball-bearing case fan with 3-pin connector runs at 12 V and 0.19 A for CPU cooling
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Cooling
- Ball bearing ensures smooth, quiet operation
- 70 mm x 15 mm frame fits compact chassis
- 12 V 0.19 A draw keeps power use low
- Three-pin connector enables speed monitoring
- Black non-LED design suits stealth builds
70 mm Ball-Bearing Case Fan
This Zyvpee 70 mm case fan uses a ball bearing and a 3-pin power connector. It runs on 12 V at 0.19 A and measures 70 by 15 mm. The black frame has no LED lighting. It is built for CPU cooling in compact chassis.
Suits tight builds needing a 70 mm replacement
The 70 mm footprint fits small form-factor cases and legacy coolers that cannot accept larger fans. The 3-pin connector provides basic voltage control without PWM. Builders who need a 25 mm thick fan or PWM speed regulation should look elsewhere.
3-pin voltage control decides compatibility
The fan connects through a standard 3-pin header, so speed varies with voltage only. If the motherboard or controller supplies only 4-pin PWM headers without voltage-mode fallback, the fan will run at full speed. Check the header type before purchase.
Kohokohdat
- Ball bearing ensures smooth, quiet operation
- 70 mm x 15 mm frame fits compact chassis
- 12 V 0.19 A draw keeps power use low
- Three-pin connector enables speed monitoring
- Black non-LED design suits stealth builds
Tekniset tiedot
| Brand | Zyvpee |
|---|---|
| Series | 2810KL-04W-B39 EA1 |
| Model | 2810KL-04W-B39 |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 70*15MM |
Kysymyksiä tästä tuotteesta
How do I install the 70 mm fan with its 3-pin connector?
Align the four screw holes with the chassis or heatsink mounts, insert screws through the 70 mm frame, and press the 3-pin plug onto the motherboard header matching the keyed guide.
What maintenance will the ball-bearing fan need later?
The sealed ball bearing is lubricated for life; only occasional dust removal from the blades and frame with compressed air is required.
What limit appears first during sustained operation at 12 V?
The fixed 0.19 A current draw caps the motor torque, so the 70 mm impeller cannot increase airflow beyond its rated speed regardless of load.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001049BTC
Varastossa