Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 70mm square case fan with 3-pin connector

Zyvpee

Zyvpee 2810KL-04W-B39 EA1 70mm 3-pin case fan

SKU CH-BX0D-6JV02

70 mm ball-bearing case fan with 3-pin connector runs at 12 V and 0.19 A for CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Ball bearing ensures smooth, quiet operation
  • 70 mm x 15 mm frame fits compact chassis
  • 12 V 0.19 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Black non-LED design suits stealth builds

70 mm Ball-Bearing Case Fan

This Zyvpee 70 mm case fan uses a ball bearing and a 3-pin power connector. It runs on 12 V at 0.19 A and measures 70 by 15 mm. The black frame has no LED lighting. It is built for CPU cooling in compact chassis.

Suits tight builds needing a 70 mm replacement

The 70 mm footprint fits small form-factor cases and legacy coolers that cannot accept larger fans. The 3-pin connector provides basic voltage control without PWM. Builders who need a 25 mm thick fan or PWM speed regulation should look elsewhere.

3-pin voltage control decides compatibility

The fan connects through a standard 3-pin header, so speed varies with voltage only. If the motherboard or controller supplies only 4-pin PWM headers without voltage-mode fallback, the fan will run at full speed. Check the header type before purchase.

Poudarki

  • Ball bearing ensures smooth, quiet operation
  • 70 mm x 15 mm frame fits compact chassis
  • 12 V 0.19 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Black non-LED design suits stealth builds

Specifikacije

BrandZyvpee
Series2810KL-04W-B39 EA1
Model2810KL-04W-B39
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions70*15MM

Vprašanja o tem izdelku

How do I install the 70 mm fan with its 3-pin connector?

Align the four screw holes with the chassis or heatsink mounts, insert screws through the 70 mm frame, and press the 3-pin plug onto the motherboard header matching the keyed guide.

What maintenance will the ball-bearing fan need later?

The sealed ball bearing is lubricated for life; only occasional dust removal from the blades and frame with compressed air is required.

What limit appears first during sustained operation at 12 V?

The fixed 0.19 A current draw caps the motor torque, so the 70 mm impeller cannot increase airflow beyond its rated speed regardless of load.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.