A-Tech
A-Tech 4GB DDR3 1066 ECC UDIMM 2Rx8 Server RAM
4GB DDR3 1066MHz ECC unbuffered DIMM with 2Rx8 rank for server upgrades
- Capacity4GB
- SpeedDDR3 1066 (PC3 8500)
- CAS LatencyCL7
- Voltage1.50V
- ECCYes
- Buffered/RegisteredUnbuffered
- 4GB capacity adds headroom for virtualised workloads
- DDR3 1066 MHz PC3-8500 speed matches legacy server specs
- ECC unbuffered design detects and corrects single-bit errors
- 2Rx8 dual-rank organisation improves memory controller efficiency
- 50 V standard voltage keeps power draw predictable
4GB DDR3 ECC UDIMM for Servers
This 4GB DDR3 1066MHz PC3-8500 ECC UDIMM module uses a 2Rx8 unbuffered design with major brand chips. It operates at standard 1.5V voltage with CL7 latency. The 240-pin DIMM is built as a compatible equivalent for Hynix HMT351U7AFR8C-G7 and HMT351U7BFR8C-G7 modules. It targets administrators upgrading DDR3 server or workstation platforms that require error-correcting memory.
Thermals and Power at Standard Voltage
Running at the JEDEC standard 1.50V, the module draws typical DDR3 power without elevated voltage overhead. The unbuffered layout avoids the extra register components that increase consumption on registered DIMMs. No active cooling is included or specified, so airflow within the server chassis handles heat dissipation during normal multi-tasking workloads.
Quality Assurance and Support Inclusions
Every module undergoes quality assurance testing before shipment to verify reliable operation. The purchase includes a lifetime warranty against defects and access to United States-based technical support for compatibility questions before and after installation. No additional software, heat spreaders or mounting hardware are bundled with the memory stick.
Ciri-ciri utama
- 4GB capacity adds headroom for virtualised workloads
- DDR3 1066 MHz PC3-8500 speed matches legacy server specs
- ECC unbuffered design detects and corrects single-bit errors
- 2Rx8 dual-rank organisation improves memory controller efficiency
- 50 V standard voltage keeps power draw predictable
Spesifikasi
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Soalan tentang produk ini
How do I install this 240-pin DDR3 UDIMM and what step do people often miss?
Align the notch on the module with the key in the 240-pin slot, press firmly until both side clips click shut, then verify in BIOS that the server detects 4 GB at 1066 MHz with ECC active.
What maintenance or replacement will this ECC UDIMM need over time?
No routine maintenance is required; if a correctable error count climbs or the module fails POST, replace it with another DDR3 1066 ECC UDIMM of matching voltage and rank.
What limit appears first when this 1.5 V module runs under sustained load?
The DDR3 1066 (PC3-8500) bandwidth ceiling is reached before thermal throttling, so sustained throughput tops out at the rated 8500 MT/s transfer rate.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



