Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

A-Tech

A-Tech 4GB DDR3 1333 ECC RDIMM 1Rx4 for HP 591750-071 593339-B21 595424-001 Server Memory

SKU CH-RZWS-SYYGS

Adds 4 GB DDR3-1333 ECC registered server memory with 1Rx4 organisation for HP systems

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server memory headroom for heavier workloads
  • DDR3 1333 MHz speed matches PC3-10600 system requirements
  • ECC registered design detects and corrects single-bit errors automatically
  • 1Rx4 single-rank layout keeps electrical loading low per channel
  • 240-pin DIMM form factor fits standard DDR3 server slots

4GB DDR3 1333 ECC RDIMM

This 4GB DDR3 1333 registered ECC module is built for HP server and workstation systems that require registered memory. It suits administrators maintaining legacy platforms where registered DIMMs are mandatory for stability.

Major brand chips with 240-pin DIMM form factor

The module uses major brand chips on a standard 240-pin DIMM PCB and operates at the standard 1.50V DDR3 voltage. Registered buffering reduces electrical load on the memory controller, supporting reliable operation in multi-DIMM configurations.

Verify DDR3 registered ECC support

Confirm your system accepts DDR3 registered ECC DIMMs before ordering, as unbuffered or non-ECC modules are not interchangeable. Check that a free 240-pin slot exists and that the platform supports 1Rx4 organisation at the required speed.

Ciri-ciri utama

  • 4GB capacity expands server memory headroom for heavier workloads
  • DDR3 1333 MHz speed matches PC3-10600 system requirements
  • ECC registered design detects and corrects single-bit errors automatically
  • 1Rx4 single-rank layout keeps electrical loading low per channel
  • 240-pin DIMM form factor fits standard DDR3 server slots

Spesifikasi

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Soalan tentang produk ini

Does the DDR3 1333 interface cap real-world throughput at PC3-10600?

Yes, the module runs at DDR3 1333 MHz with a PC3-10600 data-rate ceiling, so peak bandwidth is limited to that standard.

What physical slot and pin count does this 240-pin RDIMM require?

It fits a standard DDR3 DIMM socket with 240 pins; the registered design adds a buffer chip but does not change the slot keying.

How is the module installed and what step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, then verify the system detects the full 4 GB and ECC status in BIOS.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.