SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.00501606BTC
I lager
A-Tech
A-Tech 4GB DDR3 1333 ECC RDIMM 1Rx4 for HP 591750-071 593339-B21 595424-001 Server Memory
Adds 4 GB DDR3-1333 ECC registered server memory with 1Rx4 organisation for HP systems
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Voltage1.50V
- ECCYes
- Buffered/RegisteredRegistered
- 4GB capacity expands server memory headroom for heavier workloads
- DDR3 1333 MHz speed matches PC3-10600 system requirements
- ECC registered design detects and corrects single-bit errors automatically
- 1Rx4 single-rank layout keeps electrical loading low per channel
- 240-pin DIMM form factor fits standard DDR3 server slots
4GB DDR3 1333 ECC RDIMM
This 4GB DDR3 1333 registered ECC module is built for HP server and workstation systems that require registered memory. It suits administrators maintaining legacy platforms where registered DIMMs are mandatory for stability.
Major brand chips with 240-pin DIMM form factor
The module uses major brand chips on a standard 240-pin DIMM PCB and operates at the standard 1.50V DDR3 voltage. Registered buffering reduces electrical load on the memory controller, supporting reliable operation in multi-DIMM configurations.
Verify DDR3 registered ECC support
Confirm your system accepts DDR3 registered ECC DIMMs before ordering, as unbuffered or non-ECC modules are not interchangeable. Check that a free 240-pin slot exists and that the platform supports 1Rx4 organisation at the required speed.
I korthet
- 4GB capacity expands server memory headroom for heavier workloads
- DDR3 1333 MHz speed matches PC3-10600 system requirements
- ECC registered design detects and corrects single-bit errors automatically
- 1Rx4 single-rank layout keeps electrical loading low per channel
- 240-pin DIMM form factor fits standard DDR3 server slots
Specifikationer
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Frågor om den här produkten
Does the DDR3 1333 interface cap real-world throughput at PC3-10600?
Yes, the module runs at DDR3 1333 MHz with a PC3-10600 data-rate ceiling, so peak bandwidth is limited to that standard.
What physical slot and pin count does this 240-pin RDIMM require?
It fits a standard DDR3 DIMM socket with 240 pins; the registered design adds a buffer chip but does not change the slot keying.
How is the module installed and what step is often missed?
Align the notch with the slot key, press firmly until both retention clips click, then verify the system detects the full 4 GB and ECC status in BIOS.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
