Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green 240-pin DDR3 DIMM with black chips, silver heatsink and gold contacts

A-Tech

A-Tech 4GB DDR3 1333 ECC RDIMM 1Rx4 for HP 591750-071 593339-B21 595424-001 Server Memory

SKU CH-RZWS-SYYGS

Adds 4 GB DDR3-1333 ECC registered server memory with 1Rx4 organisation for HP systems

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server memory headroom for heavier workloads
  • DDR3 1333 MHz speed matches PC3-10600 system requirements
  • ECC registered design detects and corrects single-bit errors automatically
  • 1Rx4 single-rank layout keeps electrical loading low per channel
  • 240-pin DIMM form factor fits standard DDR3 server slots

4GB DDR3 1333 ECC RDIMM

This 4GB DDR3 1333 registered ECC module is built for HP server and workstation systems that require registered memory. It suits administrators maintaining legacy platforms where registered DIMMs are mandatory for stability.

Major brand chips with 240-pin DIMM form factor

The module uses major brand chips on a standard 240-pin DIMM PCB and operates at the standard 1.50V DDR3 voltage. Registered buffering reduces electrical load on the memory controller, supporting reliable operation in multi-DIMM configurations.

Verify DDR3 registered ECC support

Confirm your system accepts DDR3 registered ECC DIMMs before ordering, as unbuffered or non-ECC modules are not interchangeable. Check that a free 240-pin slot exists and that the platform supports 1Rx4 organisation at the required speed.

Høydepunkter

  • 4GB capacity expands server memory headroom for heavier workloads
  • DDR3 1333 MHz speed matches PC3-10600 system requirements
  • ECC registered design detects and corrects single-bit errors automatically
  • 1Rx4 single-rank layout keeps electrical loading low per channel
  • 240-pin DIMM form factor fits standard DDR3 server slots

Spesifikasjoner

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spørsmål om denne varen

Does the DDR3 1333 interface cap real-world throughput at PC3-10600?

Yes, the module runs at DDR3 1333 MHz with a PC3-10600 data-rate ceiling, so peak bandwidth is limited to that standard.

What physical slot and pin count does this 240-pin RDIMM require?

It fits a standard DDR3 DIMM socket with 240 pins; the registered design adds a buffer chip but does not change the slot keying.

How is the module installed and what step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, then verify the system detects the full 4 GB and ECC status in BIOS.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.