Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3 DIMM with black chips, silver heatsink and gold contacts

A-Tech

A-Tech 4GB DDR3 1333 ECC RDIMM 1Rx4 for HP 591750-071 593339-B21 595424-001 Server Memory

SKU CH-RZWS-SYYGS

Adds 4 GB DDR3-1333 ECC registered server memory with 1Rx4 organisation for HP systems

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server memory headroom for heavier workloads
  • DDR3 1333 MHz speed matches PC3-10600 system requirements
  • ECC registered design detects and corrects single-bit errors automatically
  • 1Rx4 single-rank layout keeps electrical loading low per channel
  • 240-pin DIMM form factor fits standard DDR3 server slots

4GB DDR3 1333 ECC RDIMM

This 4GB DDR3 1333 registered ECC module is built for HP server and workstation systems that require registered memory. It suits administrators maintaining legacy platforms where registered DIMMs are mandatory for stability.

Major brand chips with 240-pin DIMM form factor

The module uses major brand chips on a standard 240-pin DIMM PCB and operates at the standard 1.50V DDR3 voltage. Registered buffering reduces electrical load on the memory controller, supporting reliable operation in multi-DIMM configurations.

Verify DDR3 registered ECC support

Confirm your system accepts DDR3 registered ECC DIMMs before ordering, as unbuffered or non-ECC modules are not interchangeable. Check that a free 240-pin slot exists and that the platform supports 1Rx4 organisation at the required speed.

Pluspunten

  • 4GB capacity expands server memory headroom for heavier workloads
  • DDR3 1333 MHz speed matches PC3-10600 system requirements
  • ECC registered design detects and corrects single-bit errors automatically
  • 1Rx4 single-rank layout keeps electrical loading low per channel
  • 240-pin DIMM form factor fits standard DDR3 server slots

Specificaties

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

Does the DDR3 1333 interface cap real-world throughput at PC3-10600?

Yes, the module runs at DDR3 1333 MHz with a PC3-10600 data-rate ceiling, so peak bandwidth is limited to that standard.

What physical slot and pin count does this 240-pin RDIMM require?

It fits a standard DDR3 DIMM socket with 240 pins; the registered design adds a buffer chip but does not change the slot keying.

How is the module installed and what step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, then verify the system detects the full 4 GB and ECC status in BIOS.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.