A-Tech
A-Tech 8GB DDR4 2933MHz ECC RDIMM 1Rx8 for Micron MTA9ASF1G72PZ-2G9 Server Memory
An 8 GB DDR4 2933 MHz ECC registered DIMM with CL21 latency and 1.2 V operation for server upgrades
- Capacity8GB
- SpeedDDR4 2933 (PC4 23400)
- CAS LatencyCL21
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- ECC protection guards data integrity with registered DDR4 2933MHz operation
- 8GB capacity expands server workload headroom at 1.20V standard voltage
- CL21 latency delivers responsive performance for 288-pin registered DIMM systems
- 1Rx8 rank organisation optimises signal stability on major-brand chipsets
- Lifetime warranty and US-based tech support back every module purchase
Server DDR4 ECC RDIMM 8GB
This registered DIMM delivers 8GB of DDR4 memory at 2933MHz with ECC protection for server and workstation platforms. It operates at the standard 1.2V DDR4 voltage and uses a 1Rx8 organisation on a 288-pin module. The CL21 latency and PC4-23400 rating match the Micron MTA9ASF1G72PZ-2G9 specification it replaces.
Sustained-load behaviour with registered ECC
The registered buffer reduces electrical load on the memory controller, allowing stable operation when all slots are populated under continuous workloads. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute runs or virtualisation tasks. Major-brand chips and 1.2V operation keep thermals predictable in dense chassis.
Upgrade path from non-ECC or lower-capacity modules
This module replaces unbuffered non-ECC DIMMs when the platform requires registered memory with error correction. It also supersedes smaller-capacity RDIMMs such as 4GB sticks to increase total system memory without adding slots. The jump is worth it when your workload demands data integrity and the motherboard supports registered DDR4 at 2933MHz.
Ciri-ciri utama
- ECC protection guards data integrity with registered DDR4 2933MHz operation
- 8GB capacity expands server workload headroom at 1.20V standard voltage
- CL21 latency delivers responsive performance for 288-pin registered DIMM systems
- 1Rx8 rank organisation optimises signal stability on major-brand chipsets
- Lifetime warranty and US-based tech support back every module purchase
Spesifikasi
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Soalan tentang produk ini
Does the 1.20 V DDR4 2933 MHz registered module run hot or noisy under continuous server workloads?
The module operates at standard 1.20 V DDR4 voltage with no active cooling, so it adds negligible heat and produces no audible noise during all-day operation.
What motherboard slot and memory controller features are required for this 288-pin ECC RDIMM to function?
A DDR4 RDIMM slot with 288 pins and an ECC-capable memory controller that supports registered modules at 2933 MHz is required.
Can this CL21 1Rx8 registered DIMM be mixed with other DDR4 ECC RDIMMs of different speeds or ranks in the same system?
Mixing is possible if all modules are DDR4 ECC RDIMMs; the system will run at the lowest common speed and may require matching rank configurations per channel for stability.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



