暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 8GB DDR4 2933MHz ECC RDIMM 1Rx8 for Micron MTA9ASF1G72PZ-2G9 Server Memory

SKU CH-4EEP-17Y2Q

An 8 GB DDR4 2933 MHz ECC registered DIMM with CL21 latency and 1.2 V operation for server upgrades

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR4 2933MHz operation
  • 8GB capacity expands server workload headroom at 1.20V standard voltage
  • CL21 latency delivers responsive performance for 288-pin registered DIMM systems
  • 1Rx8 rank organisation optimises signal stability on major-brand chipsets
  • Lifetime warranty and US-based tech support back every module purchase

Server DDR4 ECC RDIMM 8GB

This registered DIMM delivers 8GB of DDR4 memory at 2933MHz with ECC protection for server and workstation platforms. It operates at the standard 1.2V DDR4 voltage and uses a 1Rx8 organisation on a 288-pin module. The CL21 latency and PC4-23400 rating match the Micron MTA9ASF1G72PZ-2G9 specification it replaces.

Sustained-load behaviour with registered ECC

The registered buffer reduces electrical load on the memory controller, allowing stable operation when all slots are populated under continuous workloads. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute runs or virtualisation tasks. Major-brand chips and 1.2V operation keep thermals predictable in dense chassis.

Upgrade path from non-ECC or lower-capacity modules

This module replaces unbuffered non-ECC DIMMs when the platform requires registered memory with error correction. It also supersedes smaller-capacity RDIMMs such as 4GB sticks to increase total system memory without adding slots. The jump is worth it when your workload demands data integrity and the motherboard supports registered DDR4 at 2933MHz.

特長

  • ECC protection guards data integrity with registered DDR4 2933MHz operation
  • 8GB capacity expands server workload headroom at 1.20V standard voltage
  • CL21 latency delivers responsive performance for 288-pin registered DIMM systems
  • 1Rx8 rank organisation optimises signal stability on major-brand chipsets
  • Lifetime warranty and US-based tech support back every module purchase

仕様

BrandA-Tech
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Does the 1.20 V DDR4 2933 MHz registered module run hot or noisy under continuous server workloads?

The module operates at standard 1.20 V DDR4 voltage with no active cooling, so it adds negligible heat and produces no audible noise during all-day operation.

What motherboard slot and memory controller features are required for this 288-pin ECC RDIMM to function?

A DDR4 RDIMM slot with 288 pins and an ECC-capable memory controller that supports registered modules at 2933 MHz is required.

Can this CL21 1Rx8 registered DIMM be mixed with other DDR4 ECC RDIMMs of different speeds or ranks in the same system?

Mixing is possible if all modules are DDR4 ECC RDIMMs; the system will run at the lowest common speed and may require matching rank configurations per channel for stability.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。