Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR4 2933MHz ECC RDIMM 1Rx8 for Micron MTA9ASF1G72PZ-2G9 Server Memory

SKU CH-4EEP-17Y2Q

An 8 GB DDR4 2933 MHz ECC registered DIMM with CL21 latency and 1.2 V operation for server upgrades

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR4 2933MHz operation
  • 8GB capacity expands server workload headroom at 1.20V standard voltage
  • CL21 latency delivers responsive performance for 288-pin registered DIMM systems
  • 1Rx8 rank organisation optimises signal stability on major-brand chipsets
  • Lifetime warranty and US-based tech support back every module purchase

Server DDR4 ECC RDIMM 8GB

This registered DIMM delivers 8GB of DDR4 memory at 2933MHz with ECC protection for server and workstation platforms. It operates at the standard 1.2V DDR4 voltage and uses a 1Rx8 organisation on a 288-pin module. The CL21 latency and PC4-23400 rating match the Micron MTA9ASF1G72PZ-2G9 specification it replaces.

Sustained-load behaviour with registered ECC

The registered buffer reduces electrical load on the memory controller, allowing stable operation when all slots are populated under continuous workloads. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute runs or virtualisation tasks. Major-brand chips and 1.2V operation keep thermals predictable in dense chassis.

Upgrade path from non-ECC or lower-capacity modules

This module replaces unbuffered non-ECC DIMMs when the platform requires registered memory with error correction. It also supersedes smaller-capacity RDIMMs such as 4GB sticks to increase total system memory without adding slots. The jump is worth it when your workload demands data integrity and the motherboard supports registered DDR4 at 2933MHz.

Přednosti

  • ECC protection guards data integrity with registered DDR4 2933MHz operation
  • 8GB capacity expands server workload headroom at 1.20V standard voltage
  • CL21 latency delivers responsive performance for 288-pin registered DIMM systems
  • 1Rx8 rank organisation optimises signal stability on major-brand chipsets
  • Lifetime warranty and US-based tech support back every module purchase

Specifikace

BrandA-Tech
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

Does the 1.20 V DDR4 2933 MHz registered module run hot or noisy under continuous server workloads?

The module operates at standard 1.20 V DDR4 voltage with no active cooling, so it adds negligible heat and produces no audible noise during all-day operation.

What motherboard slot and memory controller features are required for this 288-pin ECC RDIMM to function?

A DDR4 RDIMM slot with 288 pins and an ECC-capable memory controller that supports registered modules at 2933 MHz is required.

Can this CL21 1Rx8 registered DIMM be mixed with other DDR4 ECC RDIMMs of different speeds or ranks in the same system?

Mixing is possible if all modules are DDR4 ECC RDIMMs; the system will run at the lowest common speed and may require matching rank configurations per channel for stability.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.