NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
An 8 GB DDR4 2933 MHz ECC registered DIMM with CL21 latency and 1.2 V operation for server upgrades
This registered DIMM delivers 8GB of DDR4 memory at 2933MHz with ECC protection for server and workstation platforms. It operates at the standard 1.2V DDR4 voltage and uses a 1Rx8 organisation on a 288-pin module. The CL21 latency and PC4-23400 rating match the Micron MTA9ASF1G72PZ-2G9 specification it replaces.
The registered buffer reduces electrical load on the memory controller, allowing stable operation when all slots are populated under continuous workloads. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute runs or virtualisation tasks. Major-brand chips and 1.2V operation keep thermals predictable in dense chassis.
This module replaces unbuffered non-ECC DIMMs when the platform requires registered memory with error correction. It also supersedes smaller-capacity RDIMMs such as 4GB sticks to increase total system memory without adding slots. The jump is worth it when your workload demands data integrity and the motherboard supports registered DDR4 at 2933MHz.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at standard 1.20 V DDR4 voltage with no active cooling, so it adds negligible heat and produces no audible noise during all-day operation.
A DDR4 RDIMM slot with 288 pins and an ECC-capable memory controller that supports registered modules at 2933 MHz is required.
Mixing is possible if all modules are DDR4 ECC RDIMMs; the system will run at the lowest common speed and may require matching rank configurations per channel for stability.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?