Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
A 100 mm four-wire cable with black JST SH connectors on both ends

Adafruit

Adafruit STEMMA QT Qwiic JST SH 4-pin Cable 100mm

SKU CH-N4KC-0Z69A

A 100 mm JST SH cable with 4-pin connectors links STEMMA QT or Qwiic boards for sensor and driver connections

  • TypePrototyping Products
  • Connect sensors instantly with 100mm flexible cable
  • Secure 1mm pitch JST SH connectors lock firmly
  • Symmetrical design eliminates wrong-side insertion errors
  • Colour-coded wires simplify 3.3V power and I2C data routing
  • Ready for Qwiic boards and STEMMA QT devices

Connection Cable for Prototyping

This 100 mm cable links STEMMA QT and Qwiic boards using 4-pin JST SH connectors on both ends. The 1 mm pitch design keeps the assembly compact while maintaining a secure latch. Symmetrical wiring means either connector can attach to the sensor or the controller without orientation concerns.

Verify Board Headers Before Ordering

Confirm that both devices expose a 4-pin JST SH header with the standard pinout. The cable carries power, ground and I²C data lines in a fixed colour sequence. Mismatched pin assignments or a different pitch connector will prevent the link from functioning.

Colour-Coded Wires Simplify Wiring

Red, black, blue and yellow conductors map directly to 3.3 V power, ground, SDA and SCL respectively. This labelling removes guesswork when debugging the bus. No additional adapters or software are required to use the cable with compatible boards.

Ciri-ciri utama

  • Connect sensors instantly with 100mm flexible cable
  • Secure 1mm pitch JST SH connectors lock firmly
  • Symmetrical design eliminates wrong-side insertion errors
  • Colour-coded wires simplify 3.3V power and I2C data routing
  • Ready for Qwiic boards and STEMMA QT devices

Spesifikasi

TypePrototyping Products

Soalan tentang produk ini

What comes with the 100mm STEMMA QT cable and do I need any extra headers or boards?

The cable is a single 4-wire lead with JST-SH female connectors on both ends; no additional headers, boards or accessories are included.

How do I pick between the STEMMA QT and Qwiic ends on this cable?

Both connectors are identical JST-SH 4-pin plugs wired for 3.3 V power, ground, SDA and SCL, so either end can mate with any STEMMA QT or Qwiic port.

What do the 3.3 V power and I2C lines do once the cable is plugged into a microcontroller board?

Red carries 3.3 V supply, black is ground, blue carries I2C SDA data and yellow carries I2C SCL clock, letting the host talk to the attached sensor or driver.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.