نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
A 100 mm four-wire cable with black JST SH connectors on both ends

Adafruit

Adafruit STEMMA QT Qwiic JST SH 4-pin Cable 100mm

SKU CH-N4KC-0Z69A

A 100 mm JST SH cable with 4-pin connectors links STEMMA QT or Qwiic boards for sensor and driver connections

  • TypePrototyping Products
  • Connect sensors instantly with 100mm flexible cable
  • Secure 1mm pitch JST SH connectors lock firmly
  • Symmetrical design eliminates wrong-side insertion errors
  • Colour-coded wires simplify 3.3V power and I2C data routing
  • Ready for Qwiic boards and STEMMA QT devices

Connection Cable for Prototyping

This 100 mm cable links STEMMA QT and Qwiic boards using 4-pin JST SH connectors on both ends. The 1 mm pitch design keeps the assembly compact while maintaining a secure latch. Symmetrical wiring means either connector can attach to the sensor or the controller without orientation concerns.

Verify Board Headers Before Ordering

Confirm that both devices expose a 4-pin JST SH header with the standard pinout. The cable carries power, ground and I²C data lines in a fixed colour sequence. Mismatched pin assignments or a different pitch connector will prevent the link from functioning.

Colour-Coded Wires Simplify Wiring

Red, black, blue and yellow conductors map directly to 3.3 V power, ground, SDA and SCL respectively. This labelling removes guesswork when debugging the bus. No additional adapters or software are required to use the cable with compatible boards.

أبرز المميزات

  • Connect sensors instantly with 100mm flexible cable
  • Secure 1mm pitch JST SH connectors lock firmly
  • Symmetrical design eliminates wrong-side insertion errors
  • Colour-coded wires simplify 3.3V power and I2C data routing
  • Ready for Qwiic boards and STEMMA QT devices

المواصفات

TypePrototyping Products

أسئلة حول هذا المنتج

What comes with the 100mm STEMMA QT cable and do I need any extra headers or boards?

The cable is a single 4-wire lead with JST-SH female connectors on both ends; no additional headers, boards or accessories are included.

How do I pick between the STEMMA QT and Qwiic ends on this cable?

Both connectors are identical JST-SH 4-pin plugs wired for 3.3 V power, ground, SDA and SCL, so either end can mate with any STEMMA QT or Qwiic port.

What do the 3.3 V power and I2C lines do once the cable is plugged into a microcontroller board?

Red carries 3.3 V supply, black is ground, blue carries I2C SDA data and yellow carries I2C SCL clock, letting the host talk to the attached sensor or driver.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.